Im selling a Kicker 1200.1. this amp is very close to new. it has very little play time on it.
i picked this up as i was going to do 2 diff. systems. i decided not to go that route so i let a car club member use it for his L7 15's (installed by me).
this amp is great!....but im sure we all know that it is...
im asking $450.00 O.B.O.
i have feedback from around 5 forums and they are all 100% +....never had a problem.
i will take check(must clear) M.O. or paypal.
please NO trades at this time....(maybe a AB A2300HCT as i have a club member needing another one)
please e-mail me or im me for any questions...i will have pics soon.
rawdogj@hotmail.com
aim = rawdogj24
yahoo = rawdogj24
msn = rawdogj@hotmail.com
just a lil bit about the kicker amp..
SPECIFICATIONS:
Class D design
frequency response 20-200 Hz
300 watts RMS x 1 at 4 ohms 600 peak
600 watts RMS x 1 at 2 ohms 1200 peak
1200 watts RMS x 1 at 1 ohm 2400 peak
Signal to Noise Ratio: 95dB
Input Voltage: 13.8V
THD: 1.5%
stable at 1 ohm
MOSFET power supply
variable low-pass crossover 50-200 Hz at 12 dB per octave
KickBass provides up to 18 dB of boost at 40 Hz
switchable subsonic filter 25 Hz, 12 dB/octave improves efficiency by eliminating low frequencies below the range of human hearing
preamp- and speaker-level inputs
preamp outputs
remote bass level control with 20-foot cable
Amp-Strapping circuit allows two KX1200.1 amps to be joined to produce double power (must be connected to a 2-ohm load)
fan-cooled
dimensions: 22-11/16"W x 2-5/8"H x 10-1/4"D
thank you
Jason
i picked this up as i was going to do 2 diff. systems. i decided not to go that route so i let a car club member use it for his L7 15's (installed by me).
this amp is great!....but im sure we all know that it is...
im asking $450.00 O.B.O.
i have feedback from around 5 forums and they are all 100% +....never had a problem.
i will take check(must clear) M.O. or paypal.
please NO trades at this time....(maybe a AB A2300HCT as i have a club member needing another one)
please e-mail me or im me for any questions...i will have pics soon.
rawdogj@hotmail.com
aim = rawdogj24
yahoo = rawdogj24
msn = rawdogj@hotmail.com
just a lil bit about the kicker amp..
SPECIFICATIONS:
Class D design
frequency response 20-200 Hz
300 watts RMS x 1 at 4 ohms 600 peak
600 watts RMS x 1 at 2 ohms 1200 peak
1200 watts RMS x 1 at 1 ohm 2400 peak
Signal to Noise Ratio: 95dB
Input Voltage: 13.8V
THD: 1.5%
stable at 1 ohm
MOSFET power supply
variable low-pass crossover 50-200 Hz at 12 dB per octave
KickBass provides up to 18 dB of boost at 40 Hz
switchable subsonic filter 25 Hz, 12 dB/octave improves efficiency by eliminating low frequencies below the range of human hearing
preamp- and speaker-level inputs
preamp outputs
remote bass level control with 20-foot cable
Amp-Strapping circuit allows two KX1200.1 amps to be joined to produce double power (must be connected to a 2-ohm load)
fan-cooled
dimensions: 22-11/16"W x 2-5/8"H x 10-1/4"D
thank you
Jason