i have 2 diamond amps f/s.
i was going to use them to power my front stage when i got a chance to do some work, but they're just sitting in my room right now.
they are in great condition.
first up is a diamond d3 400.2. specs are as follows (taken from http://www.hifisoundconnection.com/Shop/Control/Product/fp/vpid/1330826/vpcsid/0/SFV/30046):
Diamond Audio
RMS Power Output: 200W x 2 @ 2 Ohm
Peak Power Output: 400W x 2 @ 2 Ohm
Birdged Output: 400W x 1 @ 4 Ohm
Signal To Noise Ratio: 100dB
Frequency Response: 20Hz-20KHz
Input Sensitivity: N/A
THD @ 4 Ohm RMS Power: 0.05%
Ohm Load Stability: 2 Ohm
Low Level Input: Yes
Built in Cooling Fan: No
Bass Control Knob: No
Dimensions: 12"L x 8.5"W x 2.25"H
never been used. bought it brand new last year. no scratches. mint condition. will get pics up later today.
up next i have a rare d5 300.2 amp. they do not make these anymore (as far as i kno). got this in a trade from AcidicDreams. it has been used, but cosmetically looks 9/10. he took great care of it. this is from the PM he sent me:
"I bought it used from these classifieds and it came broke. When I took it to the diamond dealer close by they recommended a local shop to have it fixed... It's benn 100% reliable and clean since...
Now for specs on the diamond:
Diamond D5 300.2
* CHANNELS: 2
o AMP OUTPUT: @ 11V - 14.5V
o RMS @ 4 Ohms = 75 x 2
o RMS @ 2 Ohms = 150 x 2
o RMS @ 4 Ohms = 300 x 1 Bridged
* Fully regulated power supply
* Variable Electronic Crossovers
* Nickel Plated Solid Brass 4-gauge Power Connectors
* Nickel Plated Solid Brass 10-gauge Speaker Connectors
* 2 Oz Silver Plated Copper Circuit Board
* THD: .03%
* F/R: 10Hz -50Khz
* S/N: 100dB
* Channel Separation: 80dB
* Amplifer Size: 12.5" x 2.75" x 12"
* FUSE RATING: 60 AMP MAX
* MADE IN THE USA
Great condition cosmetically as well. Nice SQ amp"
i am trying to sell these as i don't like the idea of having 3 amps plus a carputer in my car plus sub box. too much cluttter. i recently got a craving for usamps and want to sell these in order to buy an XT1600.4 from Flakko.
check my sig for references and ebay feedback. thanks.
i was going to use them to power my front stage when i got a chance to do some work, but they're just sitting in my room right now.
they are in great condition.
first up is a diamond d3 400.2. specs are as follows (taken from http://www.hifisoundconnection.com/Shop/Control/Product/fp/vpid/1330826/vpcsid/0/SFV/30046):
Diamond Audio
RMS Power Output: 200W x 2 @ 2 Ohm
Peak Power Output: 400W x 2 @ 2 Ohm
Birdged Output: 400W x 1 @ 4 Ohm
Signal To Noise Ratio: 100dB
Frequency Response: 20Hz-20KHz
Input Sensitivity: N/A
THD @ 4 Ohm RMS Power: 0.05%
Ohm Load Stability: 2 Ohm
Low Level Input: Yes
Built in Cooling Fan: No
Bass Control Knob: No
Dimensions: 12"L x 8.5"W x 2.25"H
never been used. bought it brand new last year. no scratches. mint condition. will get pics up later today.
up next i have a rare d5 300.2 amp. they do not make these anymore (as far as i kno). got this in a trade from AcidicDreams. it has been used, but cosmetically looks 9/10. he took great care of it. this is from the PM he sent me:
"I bought it used from these classifieds and it came broke. When I took it to the diamond dealer close by they recommended a local shop to have it fixed... It's benn 100% reliable and clean since...
Now for specs on the diamond:
Diamond D5 300.2
* CHANNELS: 2
o AMP OUTPUT: @ 11V - 14.5V
o RMS @ 4 Ohms = 75 x 2
o RMS @ 2 Ohms = 150 x 2
o RMS @ 4 Ohms = 300 x 1 Bridged
* Fully regulated power supply
* Variable Electronic Crossovers
* Nickel Plated Solid Brass 4-gauge Power Connectors
* Nickel Plated Solid Brass 10-gauge Speaker Connectors
* 2 Oz Silver Plated Copper Circuit Board
* THD: .03%
* F/R: 10Hz -50Khz
* S/N: 100dB
* Channel Separation: 80dB
* Amplifer Size: 12.5" x 2.75" x 12"
* FUSE RATING: 60 AMP MAX
* MADE IN THE USA
Great condition cosmetically as well. Nice SQ amp"
i am trying to sell these as i don't like the idea of having 3 amps plus a carputer in my car plus sub box. too much cluttter. i recently got a craving for usamps and want to sell these in order to buy an XT1600.4 from Flakko.
check my sig for references and ebay feedback. thanks.
