eD10O Dual or Single 4ohm VC vs RESE10

IMAX
10+ year member

The Prototype...
First I wanna thank everyone who has helped me in the past, but I have another question. I've decided I really don't want to run a butt load of power, I wanna run 1 10 & I wanna go sealed with good SQ. Which would you all recommend? Possibly thinking about going SVC if I go with the eD10O due to the amp I really want to go with, but I'm flexible. Would really like to hear from those who have heard both in the correct boxes, but welcome all responses. Thanks in advance...

Charles/IMAX...

 
There really won't be any audible difference between an SVC speaker or a DVC Speaker.

The ED 0's are great subs. Incredibly smooth and accurate. A decent choice for your SQ System.

The primary advantage of using DVC over SVC is wiring flexibility.

With an SVC 10 o - you are stuck with a 4 ohm load.

With a DVC 10 o - you can have 2 or 8 ohm loads depending on if you wire the VC's in series or paralell. You could also run it with only 1 VC at 4 ohm.

Depends on the final impedence that you need. If you only need 4 ohms - by all means - go for the SVC. Anything else - the DVC would be your choice!

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

PSI car audio platform 3 15" with upgrades to handle 3k watts. Or 2 PSI platform 2 12"s. EXOcontralto uses PSI subs with Incriminator audio amps...
4
210
Got it figured out! Thankfully a friend just found out about KunKonceptz UBT-20 terminal adapters that allow multiple connections to my type 94...
3
1K
These are also very good drivers, some of the best bang for the busk on shallow mounts. DD Audio SL610-D2 10"...
5
955
Whoa, that will be one skinny port. The width of the back wall ports will be 1.08" wide (27.5mm), but the front port will be shared by 2 subs so...
5
1K

About this thread

IMAX

10+ year member
The Prototype...
Thread starter
IMAX
Joined
Location
Lithonia,GA/Homestead,FL
Start date
Participants
Who Replied
Replies
3
Views
539
Last reply date
Last reply from
IMAX
20231205_074421.jpg

spokey9

    Jul 17, 2024
  • 0
  • 0
Screenshot_20240715-132222.png

1aespinoza

    Jul 15, 2024
  • 0
  • 0

New threads

Top