eclipse ti 18"

[braggpawn 10+ year member]

by the way how much power will this thing take daily

 

[seedubs1 10+ year member]

Eclipse never made a Ti 18. Unless you got the origional Ti with the 3hp motor reconed to an 18 that is.

They made a Ti pro 18, though. 4 hp motor.....4 inch coil.....Those things will SOAK up power. Sick subs if you have the power for them. I wouldn't hesitate to throw 5kw at one.

Good luck with it.

 

[braggpawn 10+ year member]

told you so but i think they had these built w/ the 18 inch cone custom

 

[ultimate157 5,000+ posts]

I fail.

 

[seedubs1 10+ year member]

definately a custom job. The normal production Ti's were only up to 15's. They made 18" Ti pros though.....But definately custom with the 3hp motor.

 

[hoxie08 5,000+ posts]

i wanna see vids when you're done too.

 

[braggpawn 10+ year member]

believe me there will be plent of vids to see lol

 

[Kyle_Keating 10+ year member]

Eclipse never made a Ti 18. Unless you got the origional Ti with the 3hp motor reconed to an 18 that is.
They made a Ti pro 18, though. 4 hp motor.....4 inch coil.....Those things will SOAK up power. Sick subs if you have the power for them. I wouldn't hesitate to throw 5kw at one.

Good luck with it.

Many Ti pro 18's were made, no Ti 18 (non- pro's ) were officially produced for resale. The ones in the picture above never touched Eclipse's hands. They don't even have mesh screens on the basket, official Ti's all do. (implies after market recone as stated)

To answer the original question:

Like the pro 15, the 18 too is still a very low Q woofer. around 0.15 to 0.18. This means is a very sensitive driver particular geared for 4th order boxes (vented) but tuning should be slightly high and the box small due to natural roll off and potential non-linear response when the resonator's peak displacement Fs is pushed to low. Tune above 30Hz, or break out some active EQ. The box can be very small and it will still work fine... the larger the box, more SPL at resonance, but the more non-linear the overall response will be.... Hard driver to work with really... nature of the 4HP.

 

[02parkave 5,000+ posts]

i know who built them

 

[reed dollaz 10+ year member]

shit my buddy had two 10" TI's in a T-line was was doing 149.x on music. *****es get loud

 

[dragnix 5,000+ posts]

by the way how much power will this thing take daily

2000 should be good enough. It'll definitely get loud off less though

 

[braggpawn 10+ year member]

i though the rms on this was like 750, 1500 peak

 

[seedubs1 10+ year member]

i though the rms on this was like 750, 1500 peak

That would be what they are rated at.....Mine laughed at 750 though. They will eat 1.5k easily if you know what you are doing.

 

[TIeclipseMOJO 10+ year member]

That would be what they are rated at.....Mine laughed at 750 though. They will eat 1.5k easily if you know what you are doing.

//content.invisioncic.com/y282845/emoticons/imwithstupid.gif.ff72b14418b3c35ebdf1ccd38da21695.gif

1000-1500rms no prob

 

[seedubs1 10+ year member]

//content.invisioncic.com/y282845/emoticons/imwithstupid.gif.ff72b14418b3c35ebdf1ccd38da21695.gif
1000-1500rms no prob

*** hole.....He was asking what kind of power they would be able to take daily. I have used these subs.....So I gave my answer.