E brake bypass help

[Cadillac_02 10+ year member]

I found an old dual flip out screen model # dual xdvd710 in the garage and am trying to install it every thing works except the ebrake wire that allows u to watch the video while ebrake is engaged any help on wAt could be goin on

Click to read more...

 

[goingdef 10+ year member]

ground the e brake line.

 

[Cadillac_02 10+ year member]

I have done that I've grounded it to the chassis and I also grounded to the chassis it and ran it to the ebrake at the same time I have also tried the toggle switch method also ???????

 

[Drummer65 10+ year member]

quick google search

1. Go into Am/Fm mode

2. Hit "setup" on the remote control

3. Enter 543210 on the remote, listening for the beep for each number entered

4. A new menu will appear. Touch the button that has the hammer/screwdriver on it in the upper left-hand part of the screen

5. Select Brake bypass to "ON" and hit the "X" near the bottom of the screen.

 

[goingdef 10+ year member]

are you sure the wire isn't broken somewhere in the jacket? I have a jvc and I just tried a hot lead to the e brake wire then a ground, that turned it on and allowed it to play, I'm not really sure whats going on with yours?

 

[Cadillac_02 10+ year member]

I heard of the hidden menus the only thing is I don't have the remote..... I was thinking that also maybe the wire came loose on the harness I'll go back out side and double check this

 

[raptor727 10+ year member]

I had to hook a relay up to mine but then again it is pioneer

 

[Cadillac_02 10+ year member]

What part does the relay Play