DUAL XDMA6630 won't turn on unless I pull & replace fuse

  • 3
    Participant count
  • Participant list

sek

Junior Member
1
0
PA
This is the 2nd unit doing the same thing. When it's turned off, it won't turn back on. I found that if I disconnect the power and reconnect it will then turn on. Is there anyone who knows about this issue? Dual Co. is no help.

 
This is the 2nd unit doing the same thing. When it's turned off, it won't turn back on. I found that if I disconnect the power and reconnect it will then turn on. Is there anyone who knows about this issue? Dual Co. is no help.
Dual is normally a cheaper brand built with substandard parts....so lots of problems....

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Got it figured out! Thankfully a friend just found out about KunKonceptz UBT-20 terminal adapters that allow multiple connections to my type 94...
3
121
These are also very good drivers, some of the best bang for the busk on shallow mounts. DD Audio SL610-D2 10"...
5
441
Whoa, that will be one skinny port. The width of the back wall ports will be 1.08" wide (27.5mm), but the front port will be shared by 2 subs so...
5
943
Assuming the box is made of .75" MDF the 12"x20"x15" box is 1.5 Cu Feet. The 33"x19"x15" is 4.3 cubic feet, something is not right here. JL has...
3
891

About this thread

sek

Junior Member
Thread starter
sek
Joined
Location
PA
Start date
Participants
Who Replied
Replies
2
Views
616
Last reply date
Last reply from
huberoy123
Screenshot_20240531-022053.png

1aespinoza

    May 31, 2024
  • 0
  • 0
Screenshot_20240524_202505_Samsung Internet.jpg

winkychevelle

    May 24, 2024
  • 0
  • 0

New threads

Top