Dual amplifier kit?

[Durry 10+ year member]

what dual amplifier kit would you guys recommend, or which components to install 2 amp would you recommend me.

please list the name of dual amplifier kit

or separates components that i would need to buy in order to install 2 amplifiers

the amplifiers are Polk Audio 330.2

i already got a rockford RFK4X complete amp kit, what else do i need to complete the second amplifier installation..?

Click to read more...

 

[daboyfrumdabx 10+ year member]

This

 

[Durry 10+ year member]

let see....what else do you recommend ?

 

[mbrant 10+ year member]

sounds like you need a single 4 ga amp kit to go along with the Rockford kit...That would be the best with plenty of room for the amps on the power wires...you might also distribute to 2 8 GA wires close to the amps from the 4 gauge kit you have??? What size wire fits in the amps?

 

[Durry 10+ year member]

they say 4ga for power and ground for the amps....

 

[mbrant 10+ year member]

then a single 4 ga amp kit should do the trick...

 

[daboyfrumdabx 10+ year member]

they say 4ga for power and ground for the amps....

then a single 4 ga amp kit should do the trick...

If each amp requires 4 gauge wire, why would you expect only one run of 4 gauge wire to work? You should run 1/0 to a distro block and then run 4 gauge to each of the amps from there. It's not that difficult to grasp.

 

[Durry 10+ year member]

so a 1/0 to a distribution block ...any recommendable brands ? and urls to buy that

 

[Deeper_shades 10+ year member]

knukoncepts seems to be the forum boner here.

whats your budget?

 

[Durry 10+ year member]

like i said, i already got one 4 GA complete kit, and my very max budget will be 100 $...i can do ebay

 

[daboyfrumdabx 10+ year member]

Sorry, I missed the part in the OP, when you mentioned you already had a 4 gauge kit. Go to KnuKonceptz and buy however many feet of 1/0 you need to reach from the battery to the trunk(or wherever the amps are mounted). Either option will work, they're OFC, here, or they're CCA, here. Pick up a distrobution block that has at least one 1/0 input and at least two 4ga. outputs, like this one. Shop around for the distro block as they may be found cheaper (i.e. our classifieds section), I'd recommend staying with a fused distro block like the one I linked though. Or you can use the existing fuse/holder you have, pick up a second and fuse each 4ga. strand coming from the distro block separately. You won't find much better wire for the money unless you find someone in the classifieds selling a leftover strand that's long enough. Even if you buy new, you'll spend under $100

 

[Durry 10+ year member]

well, thanks for the info and thanks for the news about i don't have to spend $100...

 

[daboyfrumdabx 10+ year member]

well, thanks for the info and thanks for the news about i don't have to spend $100...

Also search KnuKonceptz on ebay. Sometimes they sell left over strands and stuff for cheap.

 

[Deeper_shades 10+ year member]

man, If your going with 1/0 cable, and wanna save a buck, go to a welding store and get some welding cable. I dont care what anyone on this forum says, its grand on so many levels.

 

[Durry 10+ year member]

oh... about my battery....its in the trunk so no need of LONG cables