Does the standard 6 and 12 spoke 18" baskets share same mounting hole size

  • 1
    Participant count
  • Participant list

manyhobbies
10+ year member

Senior VIP Member
I believe the 6 and 12 spoke 18" baskets share the same cut out mounting hole size but I havn't confirmed this as of yet, so can someone confirm this. I have 6 spoke baskets to measure off to cut the holes for mounting but I will be putting 12 spoke basket subs in and dont want a sloppy hole and what I mean by this is I dont want any play in it. These are the standard common traditional baskets.

From what I measured it appears to need to be 16 5/8" with the gasket. Thanks, Russ

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Speaker ratings are generally a thermal/mechanical limitation of the drivers. Music is dynamic, not continuous. During quiet periods a song, you...
4
147
Thanks everyone for the replies! Like I said in my first post I’m not wanting to be loud, I just would like to have a little extra bass.. I like...
12
833
It's always leaned that direction. Not sure how cheap you can really get anything done these days. Deadening and custom mounting...
10
859
You're not going to know until you test with a meter. Typically even carpeting a box as opposed to painting is going to lose a few tenths.
3
1K
These are decent budget subs. The box design isn’t bad at 5 cubes for these, but I’d drop it down just a little and raise port tuning up to 32...
3
1K

About this thread

manyhobbies

10+ year member
Senior VIP Member
Thread starter
manyhobbies
Joined
Location
Celina, Ohio
Start date
Participants
Who Replied
Replies
0
Views
1,078
Last reply date
Last reply from
manyhobbies
Image 5-2-24 at 8.16 PM (1).jpeg

slater

    May 2, 2024
  • 0
  • 0
Image 5-2-24 at 8.16 PM.jpeg

slater

    May 2, 2024
  • 0
  • 0

Latest topics

Top