Distribution Block / Cabling

[kronik 10+ year member]

I purchased a KnuKonceptz ANL block. It has a 1/0 input and 2 4AWG outputs. I will probably need 2AWG cable to go to my subwoofer amplifier. Is there an adapter I can put on the end of the 2 AWG that allows me to use the distribution block or do I need to find another block?

Thanks.

Click to read more...

 

[nosaj070 10+ year member]

I really do not think you will need 2ga. THe current wiring can carry depends greatly on the length of the cable, in your case its only like 2 feet. Unless you are running in excess of 2000 watts I would say you probably would not notice a difference.

 

[kronik 10+ year member]

I really do not think you will need 2ga. THe current wiring can carry depends greatly on the length of the cable, in your case its only like 2 feet. Unless you are running in excess of 2000 watts I would say you probably would not notice a difference.

Heh, 2500W @ 2 ohm.. Viper D2500.1. ;p

 

[kronik 10+ year member]

Bump.

 

[johnecon2001 5,000+ posts]

I've got one, do you just want to add it to your wiring quote?