DISAPPOINTED ON MY FIST MIC ATTEMPT sniff sniff

[ngsm13 5,000+ posts]

Does anyone know if the mic in the Epic160 is the same as a AC190 mic ?

Hell no.

nG

 

[Lakota 5,000+ posts]

You have a loud truck and decently loud equipment. Now you need to do some testing on a Termlab so that you can learn your vehicle.

 

[.... 10+ year member]

Hell no.
nG

I have an epic 160 and everyone says it's off by like 3-7 db.

 

[BassmentJack 10+ year member]

Just found out that only one of my subs was on. Checked it with my DMM and it read 4.xx ohms, meaning my amp was only doing 750 WRMS on the one sub, while the other basically was acting like a passive radiator. Pulled the subs out and one of the jumper wires had came out. That sub read O.L. while the other was 4.something. So i figure if I had both subs running on the full 1500 I should be closer to 140 right?

 

[pawn man 10+ year member]

using a epic 160 it could be even further off than 3-7 db because of where the 160 is mounted. the mic is put on the passenger side dash for legal metering(atleast in dbdrag & iasca) & i think in meca the mic goes on the headrest. where the mic is positioned will make a very big diff. in some vehicles.

 

[hoxie08 5,000+ posts]

Just found out that only one of my subs was on. Checked it with my DMM and it read 4.xx ohms, meaning my amp was only doing 750 WRMS on the one sub, while the other basically was acting like a passive radiator. Pulled the subs out and one of the jumper wires had came out. That sub read O.L. while the other was 4.something. So i figure if I had both subs running on the full 1500 I should be closer to 140 right?

LOL

 

[stophatin 10+ year member]

dude measure it again LOL