i just installed a 3 way coustic crossover in my truck earlier. So, i run the power wire from the battery, grind a spot on the floor ,screw it down with a self tapper, plug all rca's in. i got a little lazy and spliced into the remote wire going to my 4 channel turn on the truck and it lights up
10 seconds go by and i here a little pop, look over no light long story short i ended up finding a little red wire with an inline fuse in the bag with the instructions that i had not opened:*******: installed it, thing cuts on for about 10 seconds and fuse blows. well my question is did i f**k this thing or was something already wrong with it?
10 seconds go by and i here a little pop, look over no light long story short i ended up finding a little red wire with an inline fuse in the bag with the instructions that i had not opened:*******: installed it, thing cuts on for about 10 seconds and fuse blows. well my question is did i f**k this thing or was something already wrong with it?
