Diamond M610

[blowsoot 10+ year member]

Well finally got it all hooked up M610 and KX600.1 amp. Birthsheet says 740. Anyways the sub doesn't seem like it gets that loud once you turn it up so high starts fartin not like a pop just kind of weird turn it down a lil sounds good but its not really loud. In a .70 sealed box. If the enclosure isn't air tight could that be the problem or am I just tripping. //content.invisioncic.com/y282845/emoticons/up2something.gif.dd110ecf3ae4b76050d87598f2f8de7c.gif

Click to read more...

 

[kotec123 10+ year member]

umm more likely then not that "pop" is u bottoming it out.....please turn ur bass boost and or gain down emmidietly......

 

[Ignatowski 5,000+ posts]

hows it wired?

what impedence sub do u have?

 

[blowsoot 10+ year member]

2ohm its not loud at all well with a 45hz test tone it sounds good I guess.

 

[Prowler573 5,000+ posts]

2ohm its not loud at all well with a 45hz test tone it sounds good I guess.

Just '2 ohm' doesn't tell us much. The M6 (both the original and the mkII that is the same as the D6) are DVC subs. Do you have a Dual-4 wired to 2 ohms or do you have a Dual-2 ohm driver?

 

[kotec123 10+ year member]

lol this guys is bottoming out that sub ....its gotta be....whhat else would a pop noise be at loud volume......exactly!

 

[blowsoot 10+ year member]

I know when its sounds like shit to turn it down just saying pushing it higher it starts popin I turn it down (gains or SUB-W alpine deck) immediatly. Not even like a pop noise like its bottom out.

M610MKII DVC 4 wired parallel DMM says 2.1 ohm + - + neg - neg per coil. Then Im coming off 1 coil with a + and -

 

[kotec123 10+ year member]

hmmm...bottoming out??? turn down the amp and get urself another m6 and get an amp that can push both of them and ull be loud

 

[Ignatowski 5,000+ posts]

if its a D2 model,well you bought the wrong sub

since your amp makes 600w@2ohm you need a D4 sub....

your D6 is prolly only seeing 300 watt's from that amp since your not running at the right impidence

and 300w aint gonna move much sound

this is what you have

this is what you should have

 

[blowsoot 10+ year member]

My alpine deck is like SUB-W +7 bass boost on KX all the way down gain on amp 1/2 way up. Sounds good I think with a 45hz test tone it seems like. My rear speakers powered off my deck you can hear over the bass it seems like on rock. Those diamonds sub don't get loud at all or what? amp birthsheet claims 740

 

[blowsoot 10+ year member]

Box says Diamond M6 MKII 10D4 Dual 4ohm Voice Coil. Test the sub final impedence it says 2ohms on my multimeter

 

[flakko 5,000+ posts]

lol this guys is bottoming out that sub ....its gotta be....whhat else would a pop noise be at loud volume......exactly!

OR like he said could have an air leak in the box.

 

[Ignatowski 5,000+ posts]

Box says Diamond M6 MKII 10D4 Dual 4ohm Voice Coil. Test the sub final impedence it says 2ohms on my multimeter

ahh,ok thats better

but doesnt the sub itself say itself on the rubber D4 or D2??

like this

 

[blowsoot 10+ year member]

Can't really tell if there is a leak. Loosen the screws on the sub you can hear air chief out where it mounts.... screwed down its fine. Maybe my ears are that trashed these days. //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif My IDQ 12 hit harder than this with 300watts heh.

 

[kotec123 10+ year member]

yea that def wouldnt make a pop tho.....i had an air leak in an enclosure and it just fizzed....but mayb its a dif