YukonXL04
Senior VIP Member
Hey guys, looking for some help on designing a box for this diamond D3 10 I have laying around. It will be used in my garage with a 200w sub plate amp I have. Both are laying around and would like to put them to use.
Efficiency is going to be key here. Looking for a bandwidth of roughly 28-55 hz or so. Was thinking maybe 4th or 6th order. Maybe even a 1/4 wave T Line. Need some good output vs a standard 1.0 ported box it's in now. Tuned to 35hz currently. It plays well, I just have a large pro audio 2way cabinets its gotta hang with. Really only at low to mid volume. No way will it hang when cranked up though. Max dimensions are roughly 18wx26h x 24d smaller in all directions would be preferred though. TS specs attatched.
Efficiency is going to be key here. Looking for a bandwidth of roughly 28-55 hz or so. Was thinking maybe 4th or 6th order. Maybe even a 1/4 wave T Line. Need some good output vs a standard 1.0 ported box it's in now. Tuned to 35hz currently. It plays well, I just have a large pro audio 2way cabinets its gotta hang with. Really only at low to mid volume. No way will it hang when cranked up though. Max dimensions are roughly 18wx26h x 24d smaller in all directions would be preferred though. TS specs attatched.
Last edited by a moderator: