- Thread Starter
- #31
no the preout for my sub and amp are different, the bass on my speakers are -6, and my SUB W LVL is 7/8.
IonRL205
10+ year member
DJ h4z4rdes
I guess your deck is different then, cause the bass on my deck affects the door speakers as it does the sub, and I have a sub level as well.
- Thread Starter
- #33
- Thread Starter
- #34
- Thread Starter
- #35
so is this ddm reading OKAY for my setup? even though with a -3db tone the amp reads 50.4
CAT MAN
5,000+ posts
Banned
well that reading seems high for power. 50.4v..... what ohm load and amp is it again?
- Thread Starter
- #37
1 ohm, rockford fosgate 15001bd
CAT MAN
5,000+ posts
Banned
ummm you should have a reading of 38.7 for 1500rms@1
- Thread Starter
- #39
well the gains only at 5, if i do that, itll be at 3, and wont be loud at all.
so this dosnt make sense... am i okay or no.
thers a glitch somewhere and i need help finding it.
CAT MAN
5,000+ posts
Banned
erm........might want to check the final impedence again. 38.7 is 1500@1 bro. i just now caught that. where were the rest of the people in this thread that saw that and never said anything? jeez.. bump your sub out to 0 then try the 38.7ac v reading and see how that goes..
- Thread Starter
- #41
bump it out to 0, what do u mean, when i use 0 db tone, the volts are even higher
CAT MAN
5,000+ posts
Banned
NO the sub out on the h/u to 0. the tone should stay a -3......
- Thread Starter
- #43
are u sure?? thatl make me have to turn the gain almost all the way up. or somewhere around there.
CAT MAN
5,000+ posts
Banned
thought you had the sub out at -6? let me re-read the thread. but i know 50v is too much man
- Thread Starter
- #45
no speakers are -6 
Activity
No one is currently typing a reply...
About this thread
