DC audio Lvl 5 subs question

[beat-down69 10+ year member]

This might work

 

[mylows10 5,000+ posts]

i seen it.your loosing a lot of space by going straight up on the sides

 

[beat-down69 10+ year member]

The top part of the box is 14 inches deep and the bottom of the box is 17 inches deep. I thought about taking the face off and makeing it deeper. If i make it 21 inches at the bottom and 18 inches at the top then the way i figure it should make it about 14 cubes i think

 

[beat-down69 10+ year member]

Can anyone re check my figures to make sure im correct on cubic foot of this box.

 

[mylows10 5,000+ posts]

mine followed the contours of the truck,was 54" on the top and 47" on the bottom 18" tall and 20 " deep if i remember right

 

[beat-down69 10+ year member]

should be vice versa. the bottom should be 54 and top be 47. Or atleast in my truck the top is narrower then the bottom

 

[mylows10 5,000+ posts]

i only went to the window line

 

[beat-down69 10+ year member]

oh ok. I got what your saying. I also thought about when i done the third layer on the front and cut it for 2 18s. Right there where the big port is i was going to try using 2 or 3 8" inch aero ports. What do you think about that ideal.

 

[mylows10 5,000+ posts]

the aeros worked great for me

 

[beat-down69 10+ year member]

I think im going to try it just to see what happends.

 

[mylows10 5,000+ posts]

maybe even a 10" port or two

 

[beat-down69 10+ year member]

OOh that might get nasty LOL