DFW40 10+ year member
CarAudio.com Veteran
Was using an online stripped down version from Linearteam to do some basic modeling for the Dayton 10 inch RAA sub. Can someone run the numbers on Winisd or another program to see if the online version program I am using is somewhat accurate? The program only uses the 3 thiele parameters below.
Ported box .8 cubes tuned to 30hz
FS: 27.9
vas: .99 cubed feet
qts: .47
LinearTeam
Dayton Audio RSS265HO-44 10" Reference HO DVC Subwoofer | 295-463
Ported box .8 cubes tuned to 30hz
FS: 27.9
vas: .99 cubed feet
qts: .47
LinearTeam
Dayton Audio RSS265HO-44 10" Reference HO DVC Subwoofer | 295-463