Cuttout at high volumes

[jbizzle 5,000+ posts]

Same thing happens to me but my old 4 chan doesn't like 2 ohms bridged //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

 

[Mattp13 10+ year member]

yeah i dont thinks ohms is a problem because its the pdx-5 and its digital

 

[Mattp13 10+ year member]

but who knows i could be wrong

 

[Louisiana_CRX 5,000+ posts]

your crossovers may have a protection circuit to help prevent clipping....

 

[dman4486 5,000+ posts]

yeah i dont thinks ohms is a problem because its the pdx-5 and its digital

you could be below it's minimum

 

[Mattp13 10+ year member]

i dont think it is possible because the speakers are single 4 ohms and its a 4 channel amp, i ididnt think it could go below

 

[dman4486 5,000+ posts]

i dont think it is possible because the speakers are single 4 ohms and its a 4 channel amp, i ididnt think it could go below

ah....didn't know/read what your speakers were

 

[Mattp13 10+ year member]

yeah they are pioneer 4 ways and that are 4 ohm load

 

[endofdays89 5,000+ posts]

same thing just happened to me as i was cruisin the blvd. As soon as i turned it down for 5 seconds it came back on. Even my 6x8's went out

 

[king ranch 5,000+ posts]

OK I was at school today and LEFTED for lunch and was bumping out of the parking lot then i lefted school for good and i turned it up and the speakers went out.

you lefted the parking lot wat school is that you go to make sure you get your money back if its college haha j/k man

maybe the amp got warm and shutdown

 

[Mattp13 10+ year member]

i fixed the problem i look at the gain and for some reason it was all the way up so i turn it down and it works fine now and i also regrounded the cable. and the greatest thing is i did it all when i was on the clock at work

 

[dman4486 5,000+ posts]

[No message]

 

[nchilds21 10+ year member]

i fixed the problem i look at the gain and for some reason it was all the way up so i turn it down and it works fine now and i also regrounded the cable. and the greatest thing is i did it all when i was on the clock at work

im telling

 

[Horsemanwill 10+ year member]

yeah i dont thinks ohms is a problem because its the pdx-5 and its digital

ok even after reading it all and seeing you have only 4 speakers and all are 4 ohms just because an amp is "digital" doesn't mean really nothing just thought i'd let you know. know my next question is you stated it was at half gain but when u checked it was alll the way up? so who's been in ur trunk?

 

[Mattp13 10+ year member]

one of my friends tuned my amp and said that he put it half way . and how can 4 single ohms speaker be wired to a 4 ch channel amp and be lower then 4 ohms so that wouldve have been a problem.