cutout for 4" aeroport?

[stoker42 10+ year member]

Does anyone know the cutout for a precision 4" aeroport? I cant find the cutout any where.

Click to read more...

 

[Farva 10+ year member]

It should be 6.25" on the 4" PSP port IIRC. Shoot em an email or call, click for their website.

 

[kovemaster559 5,000+ posts]

4 inches duhhhhhh

 

[Farva 10+ year member]

4 inches duhhhhhh

Wrong!

The overall diameter with the flare is around 7.25 inches and the cutout should be 6.25 inches… from what I recall. Even a 4 inch PVC port would usually have a cutout of 4.25” due to wall thickness.

 

[kovemaster559 5,000+ posts]

Wrong!

The overall diameter with the flare is around 7.25 inches and the cutout should be 6.25 inches… from what I recall.

i was being sarcastic //content.invisioncic.com/y282845/emoticons/fyi.gif.9f1f679348da7204ce960cfc74bca8e0.gif//content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[Farva 10+ year member]

i was being sarcastic //content.invisioncic.com/y282845/emoticons/fyi.gif.9f1f679348da7204ce960cfc74bca8e0.gif//content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

My bad good sir! Carry on by all means //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[bjfish11 5,000+ posts]

I also think it is 6.25"

 

[mazdakid 5,000+ posts]

just trace the smaller side of the 2 and cut that out.

 

[kovemaster559 5,000+ posts]

make it 6 inches and if you need to do a bit bigger just get your router and shave some off . thats what i would do