Custom box design for a pair of SA15's needed

[shredder2]

Aero port is a no go?

No... I just looked at the video you linked of the Kids in the SUV... this should do REALLY well on a FSD 2600 in a minitruck... lemme know if you'll be able to use this one

 

[West1 10+ year member]

No... I just looked at the video you linked of the Kids in the SUV... this should do REALLY well on a FSD 2600 in a minitruck... lemme know if you'll be able to use this one

Will do. I'll try and find some boxes before I leave work.

Will a kerf port change box dimensions?

 

[shredder2]

Will do. I'll try and find some boxes before I leave work.
Will a kerf port change box dimensions?

I'm not gonna screw with a kerfed box design... someone else can help ya then... sorry

 

[THATpurpleKUSH 5,000+ posts]

Will do. I'll try and find some boxes before I leave work.
Will a kerf port change box dimensions?

Yes a kerfed port will change dimensions dramatically. Kerfed ports really don't yield much of a gain and add complexity and time to the build.

 

[West1 10+ year member]

I'm not gonna screw with a kerfed box design... someone else can help ya then... sorry

No worries, I assume it does change. How much do you need for the current design? PM me PayPal

I'll Pay for the time. Not 100% sure I am going with this design but I will gladly pay for the help, it's appreciated bro!

Are the dimensions given with plywood thickness or without?

Looks like it is and what size plywood did you design it with?

PM Cut sheet?

Tyvm

 

[Jeffdachef 5,000+ posts]

I think my new Preference is facing forward and port up. I've been trying to dig up frontier videos and builds for the past few days. Info I gather is face forward or up on subs and port up.

subs up, port up is how my buddy got a 154.5 in his truck on two 15s dude. Full all out hair tricks as well. The port has to be pretty close to the roof or else this is not going to work.

 

[West1 10+ year member]

subs up, port up is how my buddy got a 154.5 in his truck on two 15s dude. Full all out hair tricks as well. The port has to be pretty close to the roof or else this is not going to work.

Tbh, I have no idea what 154.5 sounds like. I've never been to a beat competition nor do I have a buddy with the same audio interest. I just hear what ever drives by me lol.

However, I do not plan on raising the enclosure. I prefer the box stays as close to the ground as possible to try and keep my windows from being broken into as possible (tinted windows only go so far).

 

[shredder2]

Ok... sent... this one should do pretty well...lol

 

[Jeffdachef 5,000+ posts]

Tbh, I have no idea what 154.5 sounds like. I've never been to a beat competition nor do I have a buddy with the same audio interest. I just hear what ever drives by me lol.
However, I do not plan on raising the enclosure. I prefer the box stays as close to the ground as possible to try and keep my windows from being broken into as possible (tinted windows only go so far).

lets just say for normal bassheads(with two 12s on 2000 watts) that get in to get a demo thats when your internal organs start churning, lungs feel like a sumo wrestler sitting on you, and you have to plan your breathing between bassnotes or you'll be strangled, ears getting fked by little midgets on viagra. Normal non bassheads will run out the car immediately and full blown bassheads will love it. so yeah you'll be in between the normal bassheads and non bassheads in terms of reaction to give you a feel.

 

[West1 10+ year member]

lets just say for normal bassheads(with two 12s on 2000 watts) that get in to get a demo thats when your internal organs start churning, lungs feel like a sumo wrestler sitting on you, and you have to plan your breathing between bassnotes or you'll be strangled, ears getting fked by little midgets on viagra. Normal non bassheads will run out the car immediately and full blown bassheads will love it. so yeah you'll be in between the normal bassheads and non bassheads in terms of reaction to give you a feel.

by little midgets on Viagra LOLOL

 

[West1 10+ year member]

So the design shredder made me was to long and will not fit to the wall of the cab. Apparently I have a couple more inches of space between doors vs back of cab.

Here is the design I was given, do the numbers look right. 8 cubes with a 10" octoport @33hz for a pair of sa-15d4 v.3?

View attachment 26557366

View attachment 26557367

Tyvm!

edit:

I found a aero port calculator that you can use as a reference.

http://www.psp-inc.com/tools2.html

 

[shredder2]

Looking at space and to recline comfortably, 53" x 22" deep (license place to license plate) x 20" tall. I'd like an octoport and subs firing forward as low to the box floor as possible.
Kid like to try and avoid my chair touching the top of the sub.

Pair of sa15 or one sundown u-15.

I'm to lazy to relocate battery and this eats up 8" of possible depth (license plate to license plate).

Sooooo... will this fit then?

It's port/subs up, I hope it will be able to fit thru the door... lol

No worries, I assume it does change. How much do you need for the current design? PM me PayPalI'll Pay for the time. Not 100% sure I am going with this design but I will gladly pay for the help, it's appreciated bro!

Are the dimensions given with plywood thickness or without?

Looks like it is and what size plywood did you design it with?

PM Cut sheet?

Tyvm

So the design shredder made me was to long and will not fit to the wall of the cab. Apparently I have a couple more inches of space between doors vs back of cab.
Here is the design I was given, do the numbers look right. 8 cubes with a 10" octoport @33hz for a pair of sa-15d4 v.3?

View attachment 26557366

View attachment 26557367

Tyvm!

I used the dimensions given I think... lol... good luck man

 

[West1 10+ year member]

I used the dimensions given I think... lol... good luck man

Correct, the numbers I gave you was the area basically behind driver's seat. The new numbers are replacing the rear seats and a couple inches smaller than the 53" i originally sent you //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

Now i just need a second opinion on new design for 2 sa15's as my first x10 design had a flaw.