compustar 2wssr alarm/remote start

[audijawns]

i had this alarm installed in my 1997 audi a4 and after disconnecting the battery one day the remote will not connect to the brain of the alarm anymore what should i check first to fix this? dont really know to much about installing alarms but i have all the manuals on where to wire everythign 2 i was thinking it is probley the wire going to the ground or e brake or foot brake any help thanks

Click to read more...

 

[THUNDERBIRD 10+ year member]

look in the manual about reprogramming the remote. it might have lost the programing.

 

[audijawns]

i tired reprogrammign it many times by turning the ingition switch on and off 5 times then the brain is suppossed to make a clicking sound then send a signal to the remote but doesnt send the signal and if i press a button on the romote everythign lights up and remote beeps its nto suppossed to do that tho any help? i dont wanna bring it to an alarm place for them 2 charge me 50 bucks if it something simple or if the hoel alarm is just broke

 

[swicustoms]

get at me about this alarm situation. I am an authorized dealer for Compustar and have had this problem a few times, but it is rare. Please email me @

sicwiditcustoms@gmail.com

 

[supra06 10+ year member]

not trying to steal ur thread but was wondering if someone can get me a deal on compustar alarms? maybe swicustoms since ur a dealer?

 

[audijawns]

anyone have this same problem if no1 has any help for me i guess im taking my car with the compustar alarm to a dealership which i kno they are goign 2 charge me 50 bucks just to look at it i hope its not somethign stupid i coudl of fixed myself i kno some1 had to of had the same problem. evreythign seems to be hooked up right i checked all the fuses and both regulators are goign off after i turn the starter on and off 5 times then put the battery in the remote then it says to relays will og off first one clicks once second one clicks 2 times it does that then u are suppossed to wait 60 seconds and the remote is suppossed to configure the brain to the remote but does nothing any help please!!!!!

 

[aesoj 10+ year member]

Try unplugging the alarm's antenna for a few seconds and then reconnecting it. Afterwards, see if the alarm recognizes the remote again. Everytime my (Viper) alarm does that, it's what I have to do to get it to work again. Good luck.

-Jose