component speaker messed up, anyway to fix it?

[thaster 10+ year member]

well one of my crossover for my Crystal SSCS6 speakers crap out on me. I can't find a replacement so are there any other crossover i could replace it with?

Click to read more...

 

[thaster 10+ year member]

anyone?

 

[kevin lu 10+ year member]

go here

Equalizers - Crossovers

 

[sdmtnbiker420 10+ year member]

did you check all your wiring connections

 

[thaster 10+ year member]

the crossover coils became untangled

 

[sdmtnbiker420 10+ year member]

nice!

 

[thaster 10+ year member]

go hereEqualizers - Crossovers

can i replace it with a different brand?

 

[sdmtnbiker420 10+ year member]

i would

 

[thaster 10+ year member]

i would

but i thought the crossover were set specifically for the speakers.

 

[sdmtnbiker420 10+ year member]

nah as long u get a crossover for the same impedance speaker it should be fine.

 

[thaster 10+ year member]

nah as long u get a crossover for the same impedance speaker it should be fine.

u sure?

 

[QuikSilverRS91 10+ year member]

Personally, I would buy a pair of crossovers and replace them both just for uniformity. But that's just how I roll.

You'd be fine just replacing the 1 though. Depending on how BAMF your hearing is you might notice a slight difference between the left and right.

 

[thaster 10+ year member]

ok thanx for the clarification

 

[Louisiana_CRX 5,000+ posts]

run them active and enjoy pure clean sound the way it was suppose to be heard .......

 

[KyleBechtold 5,000+ posts]

run them active and enjoy pure clean sound the way it was suppose to be heard .......

active means you set your own xovers not that the sound is more pure.. I am sure you know this but owell

op.. if you can find out what the xover points are you can get another xover with similar specs.. or have one made or make one..