Chevy S10 ex. cab ported box for Fi

[01 S 10 10+ year member]

Im in need of some help on building my first ported box, ive built sealed before, but im still a NOOB. Im using the RE calculator: http://www.reaudio.com/speaker_box/LPort_Box_Calc.html

and if someone can punch these following numbers in this order from top to bottom as follows:

*47.5

*26

*10

*20

*0.75

*4

*6

This is going to be for 2 15" Fi SSD's powered off my Sundown 1500SAZ. The SSD's are requiring 3-4 cubes each, im wondering if this enclosure will be appropriate for my setup.

T.I.A. !

Cody

Click to read more...

 

[01 S 10 10+ year member]

??? bump

 

[Flipx99 5,000+ posts]

You are building right to the edge, eh? I wouldn't go wider than 46, but that is me. If you look at how the jump seat works, the depth changes as you move in from the back wall.

 

[01 S 10 10+ year member]

jump seat will be cut OUT! lol, no need for it, ill save the actual seat and buy a new panel if i get rid of the truck or something. But im going to cut that panel so it doesnt stick out. the box could be closer to 51" - 52", but im leaving room to mount the sundown on the drivers side. so the actual box will be about 47"- 48".

 

[Flipx99 5,000+ posts]

Gotcha...

I would PM IonSql. He does all my designs. He charges $10, but you will get something really ncie.

 

[01 S 10 10+ year member]

ok, sounds good. I'll do that when im absolutely 100% sure im getting the SSD's (im about 99.9% positive right now).

thanks again Flipx99