Hey, I'm new here of course and before i start rambling i will get right into it so i don't waste to much of your time.
Basically, I have a Chevy cavalier and i had a set of logitech Z-2300 speakers laying around. I decided to put 2 and 2 together and managed to make up some wacky installation to install them into the car. Now long story short after a lot of blood and sweat they are working in the car... kind of.
Basically all i did was buy a 600W power inverter, put the inverter in the interior of the car and put the inverter wires directly to the battery and then hook the speakers into the inverter. Now i will show a whole load of pictures at the end of this thread and you experts can tell me what you figure but my first questions or statement is:
Sometimes the system cuts out. Not cut out like short out or drain out the power or the car dies or anything it is just sometimes the speakers will be playing (some times it was playing really loud and they went and sometimes they weren't loud at all so i know its not an overload problem) the inverter has some type of mechanical beeping sound that it does on errors and sometimes it goes off. Now it must be a problem that i did because when this happens all you have to do is shut off the inverter and then turn it back on and everything works like normal. this just gets annoying in the middle of a song sometimes and this happens. or if it happens a lot in a row. the weird thing is sometimes this doesn't happen at all. and i said sometimes way to many times there haha.
Anyway. after you guys figure that out (not trying to sound like an *** here, like do this do that, just moving on to my other curiosities) my second question is:
is it possible to wire these logitech z-2300's up to the actual car itself, or the car speakers per say? right now i either listen to the radio and have the default speakers on and things like that or i turn off the deck and all of that and i turn on the inverter and speakers and plug my ipod into that and listen to the speakers. it would be really cool to make it all as one if you know what i mean. Anyway if you have any ideas of how to do that let me know. Of course there will be a whole bunch of pictures of the deck and everything for you to check out at the end of the thread. i took some pictures of the speakers in the back to to show you the connectors if that helps
sorry if there are doubles i took 2 different sets and just decided to upload them all
anyway if you need any more information let me know, i tried my best and any help is GREATLY appreciated! Thanks Boys and girls!
sorry about mess the image limit got me messed up.
Basically, I have a Chevy cavalier and i had a set of logitech Z-2300 speakers laying around. I decided to put 2 and 2 together and managed to make up some wacky installation to install them into the car. Now long story short after a lot of blood and sweat they are working in the car... kind of.
Basically all i did was buy a 600W power inverter, put the inverter in the interior of the car and put the inverter wires directly to the battery and then hook the speakers into the inverter. Now i will show a whole load of pictures at the end of this thread and you experts can tell me what you figure but my first questions or statement is:
Sometimes the system cuts out. Not cut out like short out or drain out the power or the car dies or anything it is just sometimes the speakers will be playing (some times it was playing really loud and they went and sometimes they weren't loud at all so i know its not an overload problem) the inverter has some type of mechanical beeping sound that it does on errors and sometimes it goes off. Now it must be a problem that i did because when this happens all you have to do is shut off the inverter and then turn it back on and everything works like normal. this just gets annoying in the middle of a song sometimes and this happens. or if it happens a lot in a row. the weird thing is sometimes this doesn't happen at all. and i said sometimes way to many times there haha.
Anyway. after you guys figure that out (not trying to sound like an *** here, like do this do that, just moving on to my other curiosities) my second question is:
is it possible to wire these logitech z-2300's up to the actual car itself, or the car speakers per say? right now i either listen to the radio and have the default speakers on and things like that or i turn off the deck and all of that and i turn on the inverter and speakers and plug my ipod into that and listen to the speakers. it would be really cool to make it all as one if you know what i mean. Anyway if you have any ideas of how to do that let me know. Of course there will be a whole bunch of pictures of the deck and everything for you to check out at the end of the thread. i took some pictures of the speakers in the back to to show you the connectors if that helps
sorry if there are doubles i took 2 different sets and just decided to upload them all
anyway if you need any more information let me know, i tried my best and any help is GREATLY appreciated! Thanks Boys and girls!
sorry about mess the image limit got me messed up.
Last edited by a moderator:
