cdt 560i crossover settings help

[69420potsmoker 10+ year member]

I would like to make some adjustment on the loudness of my tweeters compared to the midbass and I thought this was done with the +3db, 0db, -3db etc. settings. I looked at the crossover and there are no settings for this visible only image tweeter/main tweeter outputs.

Does this crossover not have these tweaking options?

If not then this crossover is garbage

and by the way is this forums server screwed or what? I always have some kind of error/connection problem. Ive been sitting here trying to post this message forever

Click to read more...

 

[mannyb18b]

and you made 4 threads why?

 

[69420potsmoker 10+ year member]

and by the way is this forums server screwed or what? I always have some kind of error/connection problem. Ive been sitting here trying to post this message forever

Didnt meant to, I kept hitting the button to post I guess 4 times over a 10 minute span and then finally it worked and there was 4 posts. Thats what I mean

 

[mannyb18b]

I have the same set and mine have the adjustments. I dunno

 

[69420potsmoker 10+ year member]

well Ive just taken the top grille off and looked and see nothing. Is it on the bottom or something where I need to get it out of the plastic casing?

 

[69420potsmoker 10+ year member]

there is an adjustment for the 5 inch or 6 inch woofer I see but nothing else

Hopefully someone can delete the other threads

 

[darren700 10+ year member]

the main tweeter is 0db and the image tweeter is -3db... thats all you get with the 560's

 

[69420potsmoker 10+ year member]

thanks and wow thats bullshit for an upgraded crossover.

And what would happen if I put a negative wire into the image and positive to the main or the other way around?

 

[darren700 10+ year member]

i dunno but i wouldnt suggest it... you may end up frying something...

just buy an eq if you want to adjust the tweets more accurately... or go active