revrider1
5,000+ posts
Hmmm...
I just recently had a problem with my car. My alternator and battery fried on me. Now here is the big problem, after I replaced both I redid all my wiring from the battery to the cap and then to the amp. When I came to turn the stereo on the cap is cutting of (voltage meter goes blank) and of course the amp is not working
. I was wondering is it possible to fry your cap considering I did it to both the battery and alternator:crap: . I was going to run the power directly to the amp and see if the problem is the cap
. I have never had this happen to me before since I usually replace the battery and alternator before anything I just had not got around to it yet (its my work car and I work to **** much that I dont have much time for anything
). Any help would be appreciated at least untill I have time to try and run the power direct to the amp //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif//content.invisioncic.com/y282845/emoticons/help.gif.cee8f684da1ba626487a8bc51152e1ec.gif .
