Can't figure out where these wires go for Navi?

[Bass911 10+ year member]

I'm trying to install a Pioneer F90bt in a 2001 Tahoe. I can't figure out what to hook the pink speed sensor cable too and the purple reverse gear signal output wire? These are the only 2 things holding me back. It doesn't say how to do it installation manual because I guess it's different for all cars? Pioneer says the Navigation might not be accurate without these wires. Someone PLEASE HELP!!!!!//content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif

Click to read more...

 

[ltr450racer690 10+ year member]

i didnt use mine and it works fine. i wouldnt worry about it

 

[Bass911 10+ year member]

i didnt use mine and it works fine. i wouldnt worry about it

I know what you mean, but it says in the manual for the model you have that its not necessary to hook it up. It's supposed to be different for the f90bt. I read this on the Avic Forum.

 

[ropuma]

Speed sensor cable goes to green&white cable at the factory radio harness, Reverse wire do not use.

 

[Bass911 10+ year member]

Speed sensor cable goes to green&white cable at the factory radio harness, Reverse wire do not use.

Ok Thanks! I'll try it.

 

[Bass911 10+ year member]

Speed sensor cable goes to green&white cable at the factory radio harness, Reverse wire do not use.

It Worked. Thanks again!!