cansomebody help figure box PLEASE!!

[sslacker 10+ year member]

not very good with math but could someone tell me how many square ft. the enclosure is and tuning frequency if i give the measurments?? Thanks

The box is 34" wide by 16"high, 22 " deep!!!!

The port is 6" wide 16" high and will be 16" deep!!

looking to tune about 36-38 hertz, just trying to see if I am close!!!

Thanks for the response!!!

These are internal dimensions by the way!!

Click to read more...

 

[matt_martin87 10+ year member]

What is your net volume? And if this is a typical L-port box, how can the port be 14" tall but the box 16" tall?

 

[sslacker 10+ year member]

Sorry port is 16" tall will fix

 

[matt_martin87 10+ year member]

That doesn't make sense either lol. If your box has an external height of 16", than the port is 14.5" tall, assuming there is no double baffles and you used 3/4" MDF.

 

[sslacker 10+ year member]

That doesn't make sense either lol. If your box has an external height of 16", than the port is 14.5" tall, assuming there is no double baffles and you used 3/4" MDF.

Just to clear things up external measurments are as follows

35&1/2" wide by 17&1/2" high by 23&1/2" deep!!

Hope this clears things up

 

[sslacker 10+ year member]

help anyone????

 

[Lonewolf32 10+ year member]

Just going by what you gave that would be tunned at about 41 hz. I got this by saying you used a net Volume of 6 cuft

(the internal volume - Port displacement).