Can sound deadning fall off?

[spl guru 10+ year member]

Can it fall off if applied correctly? fatmat

Click to read more...

 

[Worlddre 5,000+ posts]

if it uses a cheap adhesive or the temp limits of the material are exceeded then yes

 

[spl guru 10+ year member]

Any special you guys apply it? 2 layers criss crossed?

 

[Worlddre 5,000+ posts]

roller

 

[iDesignBoxes 10+ year member]

eD deadening can //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[hazardous0388 10+ year member]

so can peel n seal. use a heat fun before applying and after applying, the use a roller, or a scrapper and apply pressure to it so it grips good then when it starts to cool, it shouldnt come off.

 

[spl guru 10+ year member]

I use the good ol, roller, and now using fatmat. I diddnt know if fatmat had any problems

 

[vwrx_freak 10+ year member]

i had trouble with fat mat staying on parts of my roof . black truck in tx it gets hott. i used a degreaser on it then a roller and it stuck after that . atleast till i put the headliner on

 

[spl guru 10+ year member]

i had trouble with fat mat staying on parts of my roof . black truck in tx it gets hott. i used a degreaser on it then a roller and it stuck after that . atleast till i put the headliner on

Thats what im looking for!! SO rub metal down w alcohol?

 

[blackbonnie 5,000+ posts]

i use acetone to clean the surface, apply the piece, then smooth it out with a putty knife

 

[spl guru 10+ year member]

i use acetone to clean the surface, apply the piece, then smooth it out with a putty knife

Beautiful THANKS GUYS!!!

What about the second layer on roof? Best to criss cross the pieces?

 

[dirtye30 10+ year member]

always clean the surface for best results no matter what brand. i know its tough but if you look in the directions id be willing to bet thats one of the steps.

 

[spl guru 10+ year member]

always clean the surface for best results no matter what brand. i know its tough but if you look in the directions id be willing to bet thats one of the steps.

HUSHMAT says you dont need to clean it usin their products... Why i wondered. I always used hushmat

 

[bigbangtheory 5,000+ posts]

I thought you already used it. A lot of people don't like fatmat and say it is just peel and seal from Lowes. They say it won't stick if you go verticle after time. Just what quite a few people have said in the general section.

I have 100sqft myself and will be putting it on the floors. Won't be going verticle with it unless I have too. I bought some SS damplifier for the trunk and doors.

 

[blackbonnie 5,000+ posts]

raamat FTW