Can anyone make chrome rings

[Flipx99 5,000+ posts]

Looking for a chrome/stainless steel/etc ring

2.5" OD, 1 7/8" ID as thin as 1/8"

I assume these will have to cut custom made

Click to read more...

 

[ramos 5,000+ posts]

I can swing my the local machine shop and see how much they would charge if you like //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[bonesninja 5,000+ posts]

like the ones right in the middle of my amp board?

if so i got those at The Andersons, they are computer desk grommets for running your wires through.

 

[MadAudio 10+ year member]

you could probably find those at your local home improvement store they sell rings like that for installing on tarps and canvas .

 

[Qbenjamin 10+ year member]

like the ones right in the middle of my amp board?

if so i got those at The Andersons, they are computer desk grommets for running your wires through.

That looks good.

 

[Flipx99 5,000+ posts]

I can swing my the local machine shop and see how much they would charge if you like //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

That would be pretty cool if you could. My local machine shop says they do not make things for car audio applications, even though I don't see exactly how they are related.

like the ones right in the middle of my amp board?

if so i got those at The Andersons, they are computer desk grommets for running your wires through.

I may check them out, thing is the dimensions need to be precise. I can't see your pic. It is probably blocked by work.

you could probably find those at your local home improvement store they sell rings like that for installing on tarps and canvas .

I work at the second largest one in the United States. We don't carry them in that specific size. And they are grommets for the most part.

 

[ramos 5,000+ posts]

Machine shop here doesn't care what it's for //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif I'll give them the dimensions and see what they say //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[Flipx99 5,000+ posts]

Thanks!

It doesn't have to be chrome. I can polish anything.

I am thinking of using welding steel, but I would ruin my tools trying to build it

 

[maldecido33 10+ year member]

Lemme go ask the boss

 

[Flipx99 5,000+ posts]

Let me know how they respond.

I was hoping to find someone on here, that way I can use scrap from another project or something.

Two passes with a drill press and be done...

 

[Flipx99 5,000+ posts]

Any luck?

 

[ramos 5,000+ posts]

The shop I normally go to said they can't cut them that small //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif But there is another one on the other side of town I will check out today //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[Flipx99 5,000+ posts]

Sounds cool. I appreciate it very much.