cadence comps

[disturbed471985 5,000+ posts]

You leaving those Xovers exposed like that???

I see no issue with that??? I mean dont toss a glas of water on them and they will be ok.. Looks nice IMO

 

[Sleeklsc 5,000+ posts]

The only reason I went with the cwm comps insted of the zrs set is cause of the exposed x-over. Looks hella better then the 6kit's but I just didnt like the idea of them being open like that.

 

[pro-rabbit 5,000+ posts]

 

[Sleeklsc 5,000+ posts]

Front door mid, Tweets are in the factory spot in the upper door.

Rear: Mid replaces oem 5x7 and the tweeter goes in the factory tweeter location/housing

 

[CADENCE SOUND 10+ year member]

I dont know..Those dont look like theyd handle much power.Are they 100rms each, or a pair??

lol how can you tell how much power a speaker can handle by looking at them?

And ive never used less than 100wrms on any component set w/ a passive xover..

doubt I even ran less than that with an active setup...

 

[CADENCE SOUND 10+ year member]

Thanks for the pics everyone, i will be posting them up on our facebook fan page! Great installs!

If you guys have any more pics let us know, and if you guys are running active, please post your xover settings and overall system specs..

 

[pro-rabbit 5,000+ posts]

I go back and forth from active or not depending on what amps are in the truck at that time.

 

[CADENCE SOUND 10+ year member]

I go back and forth from active or not depending on what amps are in the truck at that time.

ooo you fancy huh ? loll ..check the facebook page i put a nice lil promo plug for you

And i posted up the other pics, great installs guys!

 

[chevyaddict83 10+ year member]

Well, I got a pair yesterday. I will let people know sunday, they are going in tomorrow

 

[CADENCE SOUND 10+ year member]

Well, I got a pair yesterday. I will let people know sunday, they are going in tomorrow

Let us know if you run them active, or w/ xovers...and of course share some pics

 

[JoshC 10+ year member]

I asked about these a few weeks back before i bought my CDTs, a member said he ordered a set to have them come in and one woofers lead wasnt connected, and there wasnt enough lead to solder himself so he sent it back.

Only for the next set to have a woofer with BOTH leads left unconnected and they were too short to connect himself. That was just his bad experience i guess but its worth mentioning, i thought they looked good

http://www.caraudio.com/forums/speakers/540283-any-advantage-alloy-cone.html

Post #8 & #10

 

[CADENCE SOUND 10+ year member]

I asked about these a few weeks back before i bought my CDTs, a member said he ordered a set to have them come in and one woofers lead wasnt connected, and there wasnt enough lead to solder himself so he sent it back.
Only for the next set to have a woofer with BOTH leads left unconnected and they were too short to connect himself. That was just his bad experience i guess but its worth mentioning, i thought they looked good

http://www.caraudio.com/forums/speakers/540283-any-advantage-alloy-cone.html

Post #8 & #10

D@mn that really suxxxx..Sorry for the bad experience. We have sold countless of these sets though, very few returns due to Manufacturing..

 

[pro-rabbit 5,000+ posts]

I had some lead issues but they were do to over driving them and the excursion was crazy. I had to do some repair work, but that was it. After that I toned down what I was doing and had no issues. It was only with the ones n my rear doors though.

 

[JoshC 10+ year member]

D@mn that really suxxxx..Sorry for the bad experience. We have sold countless of these sets though, very few returns due to Manufacturing..

I had some lead issues but they were do to over driving them and the excursion was crazy. I had to do some repair work, but that was it. After that I toned down what I was doing and had no issues. It was only with the ones n my rear doors though.

Yea i figured it was just a bad batch and an unlucky experience

 

[dragnix 5,000+ posts]

Pretty good set for the money. My friend had one but his tweet on the left side went out so had to go wit pg rsds