-
1Participant count
-
Participant list
-
Activity
No one is currently typing a reply...
Similar threads
Did you try the red on both sides, then the white on both sides. It may be a bad cable.
- Started by lucasguirate01
- Speakers
Got it figured out. The PAC LP7-4 LOC seemed to do the trick, and brought the noise down to a very quiet hiss similar to the stock radio...
- Started by Mapefy
- Wiring, Electrical & Installation
Ok, last ditch effort; I assume the radio high outputs do work but are capped off at the moment. Try using a passive LOC, it will be cheaper than...
- Started by L.V
- General Car Audio 2 3
Your math isn't so good. I made a mistake
I'm sorry. I'm striving to be perfect like you.
- Started by monkeyshiner
- Amplifiers
“ I would try using shielded RCA wires for starters, see what happens.”
I think I’m going to start off with that
- Started by Edwindiaz91706
- Wiring, Electrical & Installation
About this thread
