Buzzing...but only when radio is on

  • 5
    Participant count
  • Participant list

GrandMarkie

Junior Member
When the radio is on, I get a constant buzz. When I switch to a CD, the noise disappears. All RCA cables are on opposite sides of power/remote turn on wires. A few speaker wires intersect perpendicular with the power and in the trunk, they meet as well. Thoughts/ideas? I'm just confused as to why only when the radio is on it is like this.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Did you try the red on both sides, then the white on both sides. It may be a bad cable.
11
2K
Got it figured out. The PAC LP7-4 LOC seemed to do the trick, and brought the noise down to a very quiet hiss similar to the stock radio...
4
1K
Ok, last ditch effort; I assume the radio high outputs do work but are capped off at the moment. Try using a passive LOC, it will be cheaper than...
37
4K
Your math isn't so good. I made a mistake I'm sorry. I'm striving to be perfect like you.
5
2K

About this thread

GrandMarkie

Junior Member
Thread starter
GrandMarkie
Joined
Location
Waltham, MA
Start date
Participants
Who Replied
Replies
5
Views
367
Last reply date
Last reply from
JimJ
Screenshot_20240524_202505_Samsung Internet.jpg

winkychevelle

    May 24, 2024
  • 0
  • 0
Screenshot_20240523-151806.png

1aespinoza

    May 23, 2024
  • 0
  • 0

New threads

Top