BUICK PARK AVE>current draw

[jerryrobinson 10+ year member]

have anyone on here ever done a custom made ported box in a buick park ave 1991-1995 model??? please send me pictures. ive tried everything possible with power,wires alt 2 big batteries 0/1 gauge volts still goes from 14 to 10.5 when the bass hits

Click to read more...

 

[germanyt 10+ year member]

what amp?

 

[jerryrobinson 10+ year member]

kicker 1200.1 ran at 1ohms on a 15" kicker solo

 

[PSturmer 10+ year member]

this was one of my first setup in a buick century:

my amp was fused at 80 and i had a full ground. i found that buicks are hard to ground to the frame.

 

[jerryrobinson 10+ year member]

everything is ok until the bass hit ,then it drops hard

 

[sinosic 10+ year member]

everything is ok until the bass hit ,then it drops hard

check all your connections.

it might be at the fuse, did you solder the ends of all the wires? thats helps to insure a good connection. are there any breaks in the power wire. (add-ons) a customer of mine had the same issue and the problem ended up being his power wire was short so he added so he added more wire. once i installed a solid piece of wire he had very little voltage drop. are your ground and positive wires the same size? cause they should be. hope that helps

 

[jerryrobinson 10+ year member]

power & ground to the amp is both 2gauge.it dosent cut off it just soundz like im getting about 300 watts out of the amp

 

[mooze_a_B 10+ year member]

may need to recheck grounds or get a multimeter and check voltage

 

[ngsm13 5,000+ posts]

Guy at our shop has two park avenues...

A 92... and a 99... both with large systems.

nG

 

[bumpin buick 5,000+ posts]

its a 3.8 v6? I got a HO for it if ya want just took it outta my lesabre gran sport. If nothing else works i can sell ya the HO

 

[pioneerpimp 5,000+ posts]

why hasnt any questioned the connection between him asking about the ported boxes and the voltage dropping. i dont see it

 

[mlstrass 5,000+ posts]

Cause everyone knows that ported boxes draw more current //content.invisioncic.com/y282845/emoticons/crazy.gif.c13912c32de98515d3142759a824dae7.gif

 

[bumpin buick 5,000+ posts]

thats why I want you to buld me a huge ported box

 

[mlstrass 5,000+ posts]

thats why I want you to buld me a huge ported box

With my special "max current draw" port //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif