bridged or NOT ??

[night_mirage 10+ year member]

Guys, I have zx650.4 & zx650.4

and i want to power the HZ HSK156 by one of them but don't know which one

Bridging the zx350.4 175w am not sure if its 4ohm

or not bridging the zx650.4 -- 120w 4ohm

wt do u think would be better >> zx350 -- zx650

Click to read more...

 

[x2o 10+ year member]

Guys, I have zx650.4 & zx650.4 and i want to power the HZ HSK156 by one of them but don't know which one

Bridging the zx350.4 175w am not sure if its 4ohm

or not bridging the zx650.4 -- 120w 4ohm

wt do u think would be better >> zx350 -- zx650

Why not bridge the 650.4 and get 325w x 2 @ 4ohm? //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif.

Not familiar with the components so I don't know how much power they can take.

 

[night_mirage 10+ year member]

its NOT a subwoofer MAN ..

they can take upto 200w .. But i prefer NOT giving them more than 150w .. as HZ suggested

OK, u have zx350.4 .. wt do u think about it ... BRIDGED ? i did n't try any of them till now

last Q:

is there a diff between bridging & NOT bridging the AMP .. From the Quality side .. setting the Gain & HP filter // PLZ i need a pro sugg

 

[lyttleviet 10+ year member]

its NOT a subwoofer MAN ..
they can take upto 200w .. But i prefer NOT giving them more than 150w .. as HZ suggested

OK, u have zx350.4 .. wt do u think about it ... BRIDGED ? i did n't try any of them till now

last Q:

is there a diff between bridging & NOT bridging the AMP .. From the Quality side .. setting the Gain & HP filter // PLZ i need a pro sugg

Ive seen them take 250wrms + daily all day long. Don't be afraid to have the headroom @ 325wrms.

 

[Mass Car Audio 10+ year member]

its NOT a subwoofer MAN ..
they can take upto 200w .. But i prefer NOT giving them more than 150w .. as HZ suggested

OK, u have zx350.4 .. wt do u think about it ... BRIDGED ? i did n't try any of them till now

last Q:

is there a diff between bridging & NOT bridging the AMP .. From the Quality side .. setting the Gain & HP filter // PLZ i need a pro sugg

you might have to set the gain a little bit going from a 4 ohm load to a 2 ohm load. Just remember running a amp at its lowest impedance load is harder on a it than running it at 4 ohms.

 

[night_mirage 10+ year member]

you might have to set the gain a little bit going from a 4 ohm load to a 2 ohm load. Just remember running a amp at its lowest impedance load is harder on a it than running it at 4 ohms.

WTF:

How can i do it ??

set the gain a little bit going from a 4 ohm load to a 2 ohm load >> It depends on the connected Speakers/

I'm going 2 try 325w today ..

lyttleviet: i'll tell u how is it Sound ..

But i will keep the Gain LLLOOWW