box tuning

bopo668
10+ year member

JerryRig
i have a box that is made from 1/2 inch mdf and it is ported. the demsions. lenght 37",width 28", hight 13.5" and a middle wall that divides the chambers for the 2 subs the port is 2" tall,12.5" wide 16" long i was hoping some one could tell me what it is tuned and volume and would the displacement of the subwoofers change the tuning if so the net desplacement is 105 in3

untitled.jpg


 
your 37" measurement is messing w/ me.....

is it internal or ext.?

if internal...then: each side would be 18.25" long but you say that the port is only 16" long and it turns for another 1".....don't get it.?

if external...then: each side would be 17.75" long and agin, w/ the port measurements, it just don't work out....

please check the measurements and get back w/ me.

also a box that size with only 1/2" mdf?? are you sure it's half inch?...if it is i hope there is a ton or bracing.....

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

bopo668

10+ year member
JerryRig
Thread starter
bopo668
Joined
Location
tex
Start date
Participants
Who Replied
Replies
3
Views
411
Last reply date
Last reply from
LowLowBass
IMG_20260513_214311575.jpg

ThxOne

    May 13, 2026
  • 0
  • 0
IMG_20260513_213956814.jpg

ThxOne

    May 13, 2026
  • 0
  • 0

New threads

Top