Box plans for FI BTL 15" on 2400rms in trunk?

[TreyE 10+ year member]

Hey everyone I was wondering if anyone had any box plans rolling around for a FI BTL 15" sub/port back. Max dimensions are:

17" Height

40" Width

15" Deep

Thanks in advance.

Trey

Click to read more...

 

[Shroomic 10+ year member]

I have a similar sized box for a hdc315. 4.0 cuft at 35hz. 66.67sq in of port. Double baffle.

Idk what tuning those like but i could change the port length or width to fit it better.

Also sub displacement might be off by a little.

Have you tried designing your own on torres?

 

[TreyE 10+ year member]

I have a similar sized box for a hdc315. 4.0 cuft at 35hz. 66.67sq in of port. Double baffle.Idk what tuning those like but i could change the port length or width to fit it better.

Also sub displacement might be off by a little.

Have you tried designing your own on torres?

Never done it, always had other friends that were able to so Ive never had to mess with it. I can look for a how-to online, program is called Torres? Is there a mac version?

 

[TreyE 10+ year member]

Just saw its not for Mac, looks like im back out of luck //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

Could you send me the plans for your box Shroomic?

 

[Shroomic 10+ year member]

http://i1141.photobucket.com/albums/n600/Tmartin1475/aqboxwithdim2_zpsce1d8e1c.png

But I just realized you need anything but sub up port up. and the depth is off, I should've read better earlier.

Quick look at torres and i came up with this, maybe someone else can check and make sure it'd be good for an Fi

http://i1141.photobucket.com/albums/n600/Tmartin1475/fibtltorres_zps943889a7.png

 

[mylows10 5,000+ posts]

triple stack motor ?

 

[Silverado SS 10+ year member]

triple stack motor ?

You gonna buy it? Lol

 

[mylows10 5,000+ posts]

You gonna buy it? Lol

have one

 

[Oraclem19]

mount depth?

 

[NASTY08IMPALA 5,000+ posts]

http://i1141.photobucket.com/albums/n600/Tmartin1475/aqboxwithdim2_zpsce1d8e1c.png
But I just realized you need anything but sub up port up. and the depth is off, I should've read better earlier.

Quick look at torres and i came up with this, maybe someone else can check and make sure it'd be good for an Fi

http://i1141.photobucket.com/albums/n600/Tmartin1475/fibtltorres_zps943889a7.png

Not enough port area

 

[TreyE 10+ year member]

Its a 2012 FI BTL N2. Sorry I should have provided that earlier. Its also going in my friends 2003 Pontiac Vibe. How much for a simple design? Everyone Ive asked said with those max dimensions its not gunna be to full potential.

FYI - I am noob when it comes to box design.

 

[mylows10 5,000+ posts]

ask @Buck ;

 

[TreyE 10+ year member]

[quote name='mylows10']ask @Buck ;[/QUOTE]

I have been talking to him through PM's, but I found a very good local builder thats going to do it for me. Thanks everyone for the input. I measured my friends trunk and found the max dimensions are actually 40x20x20 so at least a little more room to work with.

Trey

 

[Buck 5,000+ posts]

You should really let me design it for you man, I know what I'm doing with my Fi's, I've had a few of them and I'm a big fan.

 

[Silverado SS 10+ year member]

have one

Didn't know you found one. Are you doing single 15 in the truck now?