box formulas.

[HotCarl 10+ year member]

i dont wanna use programs to calculate my boxes anymore.

i searched but all i see is program links.

can anybody point me towards any websites that tell ya the formulas and stuff so you can do em yourself?

Click to read more...

 

[squeak9798 5,000+ posts]

Sealed enclosure:

Vb = Vas/([Qtc/Qts]^2-1)

Fb = (Qtc/Qts)*Fs

F3 = Fb*((1/Qtc^2-2+((1/Qtc^2-2)^2+4)^0.5)/2)^0.5

Ported enclosure:

Vb = 20*Qts^3.3*Vas

Fb = (Vas/Vb)^0.31*Fs

F3 = (Vas/Vb)^0.44*Fs

 

[HotCarl 10+ year member]

good start. what about port length and junk like that?

 

[squeak9798 5,000+ posts]

Port length

Lv = Av*1.84*10^8/[Vb*1728*(Fb/0.159)^2] - 0.823*sqrt(Av)

Av is the cross-sectional area of the port (in square inches),

Lv is the length of the port (in inches) and

Vb is the enlcosure's net volume (in cubic inches).

Square area of a circle = Pi*r^2

Square area of a rectangle = H * W

Guess the rest depends on what you mean by "junk like that".

 

[MikeyB 5,000+ posts]

Sealed enclosure:
Vb = Vas/([Qtc/Qts]^2-1)

Fb = (Qtc/Qts)*Fs

F3 = Fb*((1/Qtc^2-2+((1/Qtc^2-2)^2+4)^0.5)/2)^0.5

Ported enclosure:

Vb = 20*Qts^3.3*Vas

Fb = (Vas/Vb)^0.31*Fs

F3 = (Vas/Vb)^0.44*Fs

I don't mean to sound like a complete noob, but what do all of those abriviations stand for in all of those equations? I have never really understood that.

 

[kuijo 10+ year member]

http://caraudio.com/vb/showthread.php?t=106885

 

[squeak9798 5,000+ posts]

I don't mean to sound like a complete noob, but what do all of those abriviations stand for in all of those equations? I have never really understood that.

Vb = net enclosure volume

Fb = box resonant frequency

F3 = -3db point in the frequency response of the system

Qtc = the total "Q" of the system (driver in the enclosure)

Qts = total Q of the driver (in the T/S parameters)

Fs = resonant frequency of the driver (in the T/S params)

Vas = volume of air that when compressed to 1m^3 exhibits the same compliance as the suspension of the driver (in the T/S params)

Fb in the port length calculation is the desired tuning frequency.

 

[MikeyB 5,000+ posts]

Thanks guys, very appreciated.

 

[HotCarl 10+ year member]

oh man, your a huge help squeak. thanks a ton.