box for type-r (REAL QUESTION)

[bcleachd]

yes i have one type-r 12'' and a hifonics amp that pounds out 750 wrms at one ohm.SO i ask what box dimensions do i need to get loudest and lowest as possible.

TUNING AND CU.FT.

space ''IS NOT'' a problem:naughty:

Click to read more...

 

[mazdakid 5,000+ posts]

use only 1 of them

 

[bcleachd]

????????

i am meaning to ask what cubic feet and tuning i should have them modify.

 

[Lil_KB 10+ year member]

If you want it to hit low give it about 2.5-2.75 a piece @ 30-32 hz. My pair are in 5.5 cubes net tuned to 32 and it shakes the truck to death.

 

[bcleachd]

If you want it to hit low give it about 2.5-2.75 a piece @ 30-32 hz. My pair are in 5.5 cubes net tuned to 32 and it shakes the truck to death.

i only have one for now and if its what i like im getting another

 

[mazdakid 5,000+ posts]

so you want to use the type r or the hifonics?

 

[dleccord 5,000+ posts]

if you get the clarion, get the rims instead imo

 

[CJL 10+ year member]

I would do 2.5^ft @ 35hz with ~30sq in of port

 

[bcleachd]

my fault i mean hifonics amp //content.invisioncic.com/y282845/emoticons/eyebrow.gif.fe2c18d8720fe8c7eaed347b21ea05a5.gif//content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif//content.invisioncic.com/y282845/emoticons/uhoh.gif.c07307dd22ee7e63e22fc8e9c614d1fd.gif

very srry

 

[PSturmer 10+ year member]

i had a 2.95 @ 32 with 30 sq inches of port area, so keep that in mind, it was a standard "L" shape port. right now its in 3 cubes and its liking it

 

[mazdakid 5,000+ posts]

i have one in 2.5@32, with 36" of port and think it was a little louder with a bigger box and smaller port

 

[bcleachd]

man i dont know what to go with because al these recomendations:crazy:

i just want the lowest and boomiest but i want a big box to produce more spl at a lower volume.