box for a SX15

Hey, Im building Netherlands box.

We are trying to decide how dificult it will be to make a ported box that has a slant on the back. I know its possible, but it seems like it will be much harder to get the correct airspace and the correct port length.

We were also thinkin of just making a regular box, and then making a dummy slant in the rear.

4cuft 32hz....
Do you think 4 is to big? RE recomends 3.5. It is going in the back of a van, and we have plenty of room to work with.

 
Let me know when you guys build it. I will bring beer, and stand there, and watch, and poke fun, and be rather useless. But it will be fun.

//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 
hey i'm doing plans right now for a ported box with a slanted back. its is quite a bit more difficult then a regular rectangular prism because you have the make the port length consisten t by angleing the port at the end. heres a pic of what i have thus far:

sample6wj.jpg


 
Let me know when you guys build it. I will bring beer, and stand there, and watch, and poke fun, and be rather useless. But it will be fun.//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif
Your welcome to come, and you can drink as long as your over 21. Im 16, so I will be staying dry. Your even welcome to poke fun, just not at me or the box //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif.

 
Bah! Expy..are you 21+? I need a drinking partner. And I cant guarantee I wont make fun of you or the box....Ill just get that out of the way right now. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 
Bah! Expy..are you 21+? I need a drinking partner. And I cant guarantee I wont make fun of you or the box....Ill just get that out of the way right now. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif
Haha, ok, ok, you can poke fun at the box. Just remember you will be intoxicated, and I will have power tools to ki.... nevermind.

 
I will bring my own power tools too! We can have power tool wars. Expy doesnt have any power tools, or any tools at all..other than being a tool himself. I dont know if I want him near...haha jk.

When do you guys plan on building this? Let me know if you need any tools...I have everything...but Im sure you do too:)

 
Maybe this weekend or the next. I have to go to a rough riders game part of saturday. I dont want to, but I have to.

Only tool I dont have is a something good to cut perfect circles. Ive been using my scroll saw and can get nice ones, but they arent perfect. I have a router also, but cant get it to cut nice ones. Any ideas?

bcarpenterfhl: Check PM's

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

netherland24

5,000+ posts
camry
Thread starter
netherland24
Joined
Location
dallas
Start date
Participants
Who Replied
Replies
22
Views
735
Last reply date
Last reply from
Insomniac119
IMG_1882.jpeg

slater

    Oct 4, 2025
  • 0
  • 0
Screenshot_20251004_120904_Photo Translator.jpg

1aespinoza

    Oct 4, 2025
  • 0
  • 0

New threads

Top