Box doesnt fit in trunk

[thejoker989 10+ year member]

I am planning on building a box but the dimensions I have in mind are too large for the subwoofer to slide in the trunk. How hard would it be to assemble the box outside of the trunk, then take it apart and put it piece by piece in the trunk. After that I would reassemble and caulk. I figure it would make my box nearly theft proof //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif. How does this sound?

Click to read more...

 

[SAG3 5,000+ posts]

why would you take it apart then build it again? just build it in your trunk.

 

[Worlddre 5,000+ posts]

sounds like it would be a bith unless the trunk itself is significantly larger then the opening allowing you accces to all sides of the enclosure to do all your drilling and such

 

[thejoker989 10+ year member]

why would you take it apart then build it again? just build it in your trunk.

That way i could use a screwdriver and already have threaded holes that I know are straight. Is it normally this hard to fit a 15" into a trunk?

 

[thejoker989 10+ year member]

sounds like it would be a bith unless the trunk itself is significantly larger then the opening allowing you accces to all sides of the enclosure to do all your drilling and such

The seats fold down so I would have access to all sides. Plus I could spin the box. It is only a single sub but the height is the problem, 15" sub with 1" MDF.

 

[azbass 5,000+ posts]

should of thought about that before you got a 15" and the box you want to fit in the trunk...

 

[Worlddre 5,000+ posts]

just out of curiosity doesn it fit in thru the back seats because thats how i gots mine in?

or you could fire the sub upwards

 

[James Bang 5,000+ posts]

3/4"?

 

[thejoker989 10+ year member]

No I am about two inches too high to go through the back seat. Maybe I will change the dimensions so it will fit. Is 1" MDF board overkill?

 

[937DYTBOI 5,000+ posts]

make a false floor and drill screws through the box into the false floor and nobody should be able to take it out, thats all i did