Box build for Chuck

Mike465
10+ year member

Ami Creations
2,858
0
Kennesaw, GA
Ok everyine this box was for a local guy. The box is for 2-15" RD Audio Alpha's v2. The box went into a 06 hatchback Civic. Box is 4.2 cubic feet after displacemets. Box has 60 square inches of port tuned to 35Hz.

Here are the pics (or lack of)

IMG00003-20090210-2016.jpg


IMG00004-20090210-2017.jpg


IMG00005-20090210-2030.jpg


IMG00006-20090210-2030.jpg


IMG00007-20090210-2103.jpg


IMG00008-20090210-2231.jpg


IMG00009-20090210-2231.jpg


IMG00010-20090210-2232.jpg


IMG00011-20090210-2232.jpg


 
soooo, they still do not have near enough space...he should have went with 12's.....just another guy trying to fit what he cant in his setup..

I'm curious how they will take the small box

Nice work too man, keep em comin

 
Stop talking bout how its not enough air space. He's the box builder, he does what he's paid to do. Not like any of you would be like "Sorry I cant build that box those speakers wont sound good in it" lol.. Money talkS! nice build mike

 
soooo, they still do not have near enough space...he should have went with 12's.....just another guy trying to fit what he cant in his setup..
I'm curious how they will take the small box

Nice work too man, keep em comin
Thanks will do..............I will be starting on Steve Miller's new box next week. He will be getting in the new prototype Alpha Maxs and is going to be running 2 15's at over 4k rms. The box is going to be a beast looking a little over ten cubic feet. Each sub will be seeing 3.8-4.0 cubic feet.

 
The Alpha's only need 3.8 to run at their best.
per sub right?
^^^^^^^^^^^^^^^^^Yes, that is correct
but its 4.2cf net TOTAL //content.invisioncic.com/y282845/emoticons/wow.gif.23d729408e9177caa2a0ed6a2ba6588e.gif

man, hope it doesnt sound like garbage. and give the subs a bad rep for people that hear his setup //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

I think you're gonna have to get good with fiberglass or something, or find someone with a 3d laser scanner that can 3d print or mold you some...
7
1K
The tricky bit is that they're soft and floppy and they may be stretched a tad to go over the frames. I've used them in the past and come out...
6
2K
In order to answer your question, I would need to know what model (e.g. SW4200, SW7524DVC). Also, are you looking to make a ported box or sealed?
3
2K
Thanks everyone for the feedback. I got scared of the 4th being to much for a newbie but did end up building a box to 2.1 Cubic Foot tuned to...
7
2K
Love this sub, hate AB's site, short on info for sure. American Bass XR-10D2 box recomend: If you want to tune a 2.75 Cu Ft box (for two of these...
11
3K

About this thread

Mike465

10+ year member
Ami Creations
Thread starter
Mike465
Joined
Location
Kennesaw, GA
Start date
Participants
Who Replied
Replies
13
Views
1,177
Last reply date
Last reply from
Mike465
20240604_170857.jpg

metalheadjoe

    Jun 5, 2024
  • 0
  • 0
Screenshot_20240605_200209_Adobe Acrobat.jpg

Dylan27

    Jun 5, 2024
  • 0
  • 0

New threads

Top