Big three question

[ascitiesburn69 10+ year member]

Ok I long time ago I upgraded my engine block ground and my battery to chassis ground but my cars alternator requires me to get under my car to get to so I didn't do it at that time. However, I did notice that the single wire that goes from the alt goes straight into the starter solenoid and goes from the solenoid to the battery positive. I was wondering If i left the factory wire that goes to the starter solenoid(for obvious reasons //content.invisioncic.com/y282845/emoticons/rolleyes.gif.c1fef805e9d1464d377451cd5bc18bfb.gif) and just added 1/0 from the alternator to the battery positive, would it cause a problem?

Click to read more...

 

[ascitiesburn69 10+ year member]

Anyone have any ideas?

 

[Stalin-ohaulic]

You'd be just fine doing that.

 

[ascitiesburn69 10+ year member]

Are you positive?(no pun intended)....I mean I see no reason that it would cause any concern except for the fact that voltage would be more readily available to the battery

 

[MikeyF 10+ year member]

Your not replacing the wires, only adding more.

 

[BobbyDD 10+ year member]

It won't cause any problems.