Big Enough Aero Port For A 10" SSD?

[cf2004 10+ year member]

Will a 2"x7.75"(approx.) Aero Port be big enough for a 10" SSD in a .95^ft box tuned to 33hz?

According to the precision ports cacluator a 2" x 7.75" Aero Port will tune a .95^ft box to 33hz. I am just not sure if that will be enough port for that sub.

Also the 2" aerp port at that lenght is my only choice with my box. If the port is any longer it will interfer with the sub.

Any thoughts?

I also searched and didnt find anything real specifc. But it was also very late that night.

Click to read more...

 

[Slim_Shady]

I'd say at least a 4" port.

Make it partially external if need be.

 

[cf2004 10+ year member]

according to the calculator, that would be a 30" long port for a 4" aero //content.invisioncic.com/y282845/emoticons/wow.gif.23d729408e9177caa2a0ed6a2ba6588e.gif

 

[av8ter 10+ year member]

What would a 3'' be?

 

[skmfkr 5,000+ posts]

http://www.carstereo.com/help/Articles.cfm?id=31

 

[schrummy 10+ year member]

the 2 in port will give you about 12.5 in^2 of port which with a box that is less then a cubic foot, will work just fine.

 

[Slim_Shady]

according to the calculator, that would be a 30" long port for a 4" aero //content.invisioncic.com/y282845/emoticons/wow.gif.23d729408e9177caa2a0ed6a2ba6588e.gif

Hmm

3''er or a slot port

I would not go any smaller than 3"..Is going partially external out of the question?

 

[Slim_Shady]

the 2 in port will give you about 12.5 in^2 of port which with a box that is less then a cubic foot, will work just fine.

//content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif

 

[PsychoTheRapist 5,000+ posts]

the 2 in port will give you about 12.5 in^2 of port which with a box that is less then a cubic foot, will work just fine.

No.

 

[RAM_Designs 5,000+ posts]

A single 3" aeroport is fine for a 10" sub.

 

[cf2004 10+ year member]

http://www.carstereo.com/help/Articles.cfm?id=31

thanks for the link! When I check for my minimum usable vent diameter it shows me needed about a 6" diameter. Then when I check for the lenght using the 6" dimeter its shows I need a 69" long port to get the 33 hz tuning

sorry am just confused lol

 

[cf2004 10+ year member]

Hmm
3''er or a slot port

I would not go any smaller than 3"..Is going partially external out of the question?[/QUOTE]

not really, but I dont really like the look of external.

 

[schrummy 10+ year member]

yep i used the wroung equation

 

[Slim_Shady]

What amp are you using?

Maybe you could wo w/ a slightly bigger box to cut down on the port length

 

[mobeious 10+ year member]

ya why the .95?