Big 3 Q..

[haunther]

Hey just a question about the big 3..

I did it last night an im just checking my work..

Do i need to remove the stock alt to battery cable?

I just covered the orignal loop with a cover an eletrical tape...

Any need to really get it out?

-Thanks

Click to read more...

 

[Ctminime 10+ year member]

u dont HAVE to remove the old wire.... just more to conduct right?

 

[dkguitarist 5,000+ posts]

just leave it. current flow will take the less resistive path regardless. more hassle to remove it. no point. just leave it. //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[FrEnChYII 10+ year member]

I have a question, but don't want to start my own thread about it since there are so many as is...

If I do just the neg. to ground, and positive to alt. without doing the block to chassis, will it still be fine? I don't have the weather to redo the block to chassis right now.

 

[dkguitarist 5,000+ posts]

I have a question, but don't want to start my own thread about it since there are so many as is...
If I do just the neg. to ground, and positive to alt. without doing the block to chassis, will it still be fine? I don't have the weather to redo the block to chassis right now.

it'll help some, but doing all 3 will yield the biggest result. some is better than none. 2/3 will be good (but better to do all 3 eventually). //content.invisioncic.com/y282845/emoticons/cool.gif.3bcaf8f141236c00f8044d07150e34f7.gif

 

[FrEnChYII 10+ year member]

I will, in about two weeks once the snow goes away... and it gets warmer out. lol

 

[SPL140.2 5,000+ posts]

I will, in about two weeks once the snow goes away... and it gets warmer out. lol

dont forget to upgrade the wire to the starter

 

[BaseSteala112 10+ year member]

dont forget to upgrade the wire to the starter

Never heard that one before. What gauge should be used?

 

[johnecon2001 5,000+ posts]

Never heard that one before. What gauge should be used?

Don't worry about that one. It doesnt help your electrical system at all.

 

[Lakota 5,000+ posts]

It's always best to leave the stock wiring.

 

[SPL140.2 5,000+ posts]

Don't worry about that one. It doesnt help your electrical system at all.

why have a weak link to complete the whole "circuit or loop"?? Itll only take a few minutes anyways

 

[thugpassion 10+ year member]

why have a weak link to complete the whole "circuit or loop"?? Itll only take a few minutes anyways

if you're not having starting issues then why?

 

[ngsm13 5,000+ posts]

Always ADD ON to existing wires when doing the big three... never replace.

You don't want to mess up any stock electronics by removing the wrong wire. If you leave all wires that were there in the first place, you know it'll work correctly.

nG