Best type R box specs!

[HardCoreSound 10+ year member]

ok..

 

[amartin_72]

NO, if you want it real loud, make sure its atleast 4.8ft NEt, tune to 34-36, and make sure you have 65-80 in of port area. I used to have a pa3000db too, but i had my two r's in 3.6 each @37hz w/88in port area, i hit 141.6 on the TL. (the box was designed to put 3 in but i only had 2 at the time, ran it ,and its surpisingly loud. the more you go over 6ft net (3ft each) the louder it will get but it will start to sound more like your listening to the music with bass in the backround niot part of the music, with horrible groupdelay and transistent response, but LOUD. Going over 90 in of port arera (45each) starts to make them farters too, with NO top end (50-70hz)

 

[dleccord 5,000+ posts]

i usually go one way or the other because somewhere in between is a little this and a little that. for me, it doesnt cut it so i tune it high to get that pressure feeling or i tune it low if i want to tire ear.