Bent Pole Piece

[retrojordans 10+ year member]

Craigslist. Woot.

Oldschool W6 15"

10$

Want to make it into a Midbass 8"

The magnets and pole piece just easily move around..lol Wtf..

Click to read more...

 

[pro-rabbit 5,000+ posts]

If you don't want to mess with the pole I can sell you a motor/basket setup from a 10W6.

 

[retrojordans 10+ year member]

If you don't want to mess with the pole I can sell you a motor/basket setup from a 10W6.

Well I mean I'm trying to upload the pics right now it's like...The 2 magets just came unglued? I pushed my heel on the pole piece and pulled up on the basket and the bottom plate/bottom magnet came out..I just need to remove the top plate from the basket and epoxy the magnets together but I mean..To do this all precisely.

 

[retrojordans 10+ year member]

 

[retrojordans 10+ year member]

So nothing is bent which is great.

Now the problem is the top plate doesn't have bolts for an aftermarket basket.

I could try to dissect the top magnet from the top plate, then countersink and epoxy bolts into the top plate facing upwards for an aftermarket basket...

Ideas?

 

[retrojordans 10+ year member]

SUCCESS!

I officially shed blood for this 8" midwoofer...There is no turning back now!

 

[audioholic 5,000+ posts]

Keep in mind that midbass is directional, and should be in stereo. A single midbass woofer is not going to do this.

 

[SPLaudio 5,000+ posts]

the glue gets dried out after some time and comes apart. the cut is nothing wait it ya put the motor back together. it is a really small motor though....

 

[schackel 10+ year member]

lol sharp

 

[retrojordans 10+ year member]

Keep in mind that midbass is directional, and should be in stereo. A single midbass woofer is not going to do this.

Good to know, maybe it will just be a little project then //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[pro-rabbit 5,000+ posts]

Good to know, maybe it will just be a little project then //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

if you need a 2nd let me know hahaha

 

[retrojordans 10+ year member]

if you need a 2nd let me know hahaha

10$ shipped?