Been gone a long time, need sub help

[92SS wagon 10+ year member]

I use to be into car audio huge in the 90's. Over the past couple months I have been building my system.

I have the old Autotek 7600 BTS amplifiers with these specs:

Output power at 11.5 to 14.4V:

2 x 300W @ 4 ohms (0.015% THD)

2 x 600W @ 2 ohms (0.15% THD)

1 x 600W @ 8 ohms bridged (0.015% THD)

1 x 900W @ 4 ohms bridged (0.15% THD)

1 x 1100W @ 4 ohms bridged (0.5% THD

I use to run 4-15" Savard woofers off one 7600. I believe they were single 4 ohm. What subs would you reccomend today to get the most out of this amp?I have a wagon so sub space is plenty. I want it LOUD .Thanks guys.

DJ

Click to read more...

 

[bones22 5,000+ posts]

Fi is one that will come from a lot of people.

the Fi Qs wouldnt be bad

 

[MEMPHISFLEX 10+ year member]

You need a good effecient sub, something like the TXX-APX, or FI Q, Atomic ELEs or APXs, RE SXs are not to bad either, but you want something that doesnt need a ton of power to get loud, and them are some good choices

 

[92SS wagon 10+ year member]

I checked out the subs you guys stated. The FI's are quad 1 ohm speakers. That would be too low of imp for the amp I have wouldn't it?

And Audiopipe makes the TXX-APX correct? Sorry I don't know the models well either(lol)

 

[dragon.breath 10+ year member]

also take a look at jl audio w3 series subs.

 

[morgans432 10+ year member]

also take a look at jl audio w3 series subs.

actually no don't unless you want to pay an arm and leg for crap

 

[dragon.breath 10+ year member]

and here comes all the jl haters. quiz any one of them and (1) they are just repeating what they heard someone else say. (2) they put 750 watts on a 300 watt sub and blew it and blame jl for rating the speaker correctly(3) they flame anything they cannot afford reguardless of what it is.

and no i do not run jl audio subwoofers

 

[92SS wagon 10+ year member]

I don't care to argue, I just need some help

I want to get subs to get the most of of this old school amp. Any other ideas? Do I need subs that are single 4ohm?Thanks.

 

[dragnix 5,000+ posts]

and here comes all the jl haters. quiz any one of them and (1) they are just repeating what they heard someone else say. (2) they put 750 watts on a 300 watt sub and blew it and blame jl for rating the speaker correctly(3) they flame anything they cannot afford reguardless of what it is.

and no i do not run jl audio subwoofers

I've had 2 12w3 and i'll tell you that they **** for the price.

To the OP, just do a search on brands like FI, IA, Mach5 (my favorite company //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif), and maybe even SSA and you may just find the sub you need.

Edit: does mach5 still offer the m-series sub? those would do you good.

 

[dragnix 5,000+ posts]

I checked out the subs you guys stated. The FI's are quad 1 ohm speakers. That would be too low of imp for the amp I have wouldn't it?
And Audiopipe makes the TXX-APX correct? Sorry I don't know the models well either(lol)

FI's are dual 1ohm, not quad.