Bass knob

[Setty7 10+ year member]

Can someone please tell me how it works and how to hook it up. It's a RCA one

Click to read more...

 

[bizkit11 10+ year member]

all you do is run a set of rca's from your hu to the input end of the knob then another rca from the output end of the knob the the amp, it will help you balance out the bass at your fingertips but you'll still have to set your gains on your amp.

 

[soundstreamer 10+ year member]

Is it an LCE-1 ???

 

[Setty7 10+ year member]

I got it off eBay it's a universal one. What should I set my gain at?

 

[bizkit11 10+ year member]

As for your gain's every system is different if you don't have way's to check for clipping then you'll have to go by how it sounds.

 

[Setty7 10+ year member]

Well I'm getting a alpine mrp-m500 which is 500 watts at 2 ohms and I have a 12" kicker cvr which is 400 watts at 2 ohms so how do I set it where I don't blow anything?

 

[pickup1 5,000+ posts]

Well I'm getting a alpine mrp-m500 which is 500 watts at 2 ohms and I have a 12" kicker cvr which is 400 watts at 2 ohms so how do I set it where I don't blow anything?

half to about 3/4's!

 

[Setty7 10+ year member]

Ok and set the volume on the amp for the sub to what?