based on ts parameters only...which one would you choose?

[GohillaAudio]

ok, based ONLY on its parameters, which setup do you think would be louder?

TWO of these?

Fs: 35.1 Hz

Re: 0.75 Ohms/coil

Qms: 6.23

Qes: .47

Qts: .44

Mms: 232g

Cms: 0.089mm/N

Sd: 810cm^2

Vas: 81.6

Spl: 90.6dB 1W/1m

Bl: 12.8

Xmax: 21mm

Rms: 1000W

or FOUR of these:

Vas: 158.11

fs: 28.45

Qts: 1.146

Xmax: 7.5mm

Re: 3.6

mms: 179.7

Cms: 174.07

spl. 96.0 1W/1m

there all 15's

Click to read more...

 

[helotaxi 5,000+ posts]

Impossible to answer.

 

[cjcrook 10+ year member]

What is the power handling of the 2nd subwoofer?

 

[GohillaAudio]

i figured someone more educated than myself would know.....

i was avoiding brand because i wanted an unbiased opinion.....but i guess i cannot get one

the subs are 2 Fi bl fully loaded 15"s

and 4 planet audio RX2154 15's

i dont really wanna use the planet audio 15's because i really want another bl....but i think i might have to.....

heres specs on the planet audio's

http://www.planetaudiousa.com/main/512

im looking solely for spl at the moment

 

[GohillaAudio]

350w rms each, but they would see about 2000w for all 4

same with the first one, roughly 2000w for both

 

[Serpent710 10+ year member]

i would have to say the bl's

 

[GohillaAudio]

yea, thats what im leaning towards, the 4 15's=more cone area the bl's have less cone area, but more than double the x-max

i think it might be a toss up....

exept for the fact the 4 would put me in a higher class

 

[helotaxi 5,000+ posts]

If you're running a ported system, Xmax isn't much of an indicator of output potential since you will usually destroy the sub before you approach that amount of excursion.