Bandpass Enclosure calculator

[xtremekustomz 10+ year member]

If anyone has one that is reliable and doesn't mind giving me some enclosure sizes and port lengths (4th order) it is for a Pyle PLMRW10. (Qts .46) (Vas 3.012) (FS 32) I've got 2 of them going on a ski boat and want to get them as loud as possible. Thanks for any info.

Click to read more...

 

[SilverSquared 10+ year member]

If anyone has one that is reliable and doesn't mind giving me some enclosure sizes and port lengths (4th order) it is for a Pyle PLMRW10. (Qts .46) (Vas 3.012) (FS 32) I've got 2 of them going on a ski boat and want to get them as loud as possible. Thanks for any info.

Pretty sure, just keep it in a prefab box with no more than 200w.

 

[xtremekustomz 10+ year member]

There is no prefab box that is going to work in this boat. I am going to have to glass one in. It's not mine but I am getting paid to do it and I want it as loud as possible.

 

[Immacomputer 10+ year member]

I would do about 2.5 cubes tuned to 60hz for the vented chamber with 3 4" PVC ports about 8.25" long each. Then I would do about 4 cubes for the sealed chamber. I wouldn't put much power to them though; try to keep it around 300wrms for the pair.

Make sure the 2.5 cubes is AFTER port displacement or at least close to it.